Description
The Kamarne is a round LED downlight that sits recessed into the ceiling, with a brushed satin nickel bezel 8.8cm across framing a deep, faceted reflector. The body is aluminium and the light source is an integrated LED, so there is no bulb to buy or change. It draws 6W and gives 600lm of cool white light at 4000K, a crisp, clear white that feels bright and awake. The IP20 rating settles one decision early: this downlight is for dry rooms indoors, never a bathroom or anywhere outside.
Set in a line along a hallway ceiling, a few of these give an even wash of light while keeping the ceiling plain, with only the slim nickel rings showing. They work just as well on a landing, in a home office or study, a dressing room or a living room where a pendant would crowd a low ceiling. Cool white is a good match for spaces used for reading, sorting paperwork or getting ready in the morning, and because the downlight is dimmable it can be turned down on a suitable dimmer when the evening calls for something gentler. The satin nickel finish sits comfortably with brushed steel handles, chrome switch plates and grey or white schemes.
Each downlight needs a hole 6.8cm across cut into the ceiling and a recess depth of 5.6cm, so it is worth checking the void above before ordering. Spring clips grip the ceiling board to hold it in place. It runs on mains power at 220-240V and has no switch of its own, so it is switched at the wall, and it carries an energy class of E. Aluminium is light and does not rust. Packed, each one weighs 0.214KG. As a mains light wired into the ceiling, it is installed by a qualified electrician, and the installation instructions come as a download.
Specification
| Diameter |
8.8cm |
| Body Material |
Aluminium |
| Body Colour |
Satin nickel |
| Light Source |
LED, integrated |
| Wattage |
6W |
| Lumens |
600lm |
| Colour Temperature |
4000K |
| Dimmable |
Yes |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
E |
| Recess Depth |
5.6cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.214KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I fit the Kamarne downlight in a bathroom?
No. It is rated IP20, which means indoors and dry only, so it belongs in rooms well away from water such as hallways, landings and living rooms.
What size hole does the downlight need?
It needs a cut-out 6.8cm across in the ceiling and a recess depth of 5.6cm, while the satin nickel bezel itself is 8.8cm across.
How bright is the light, and what colour is it?
The integrated LED draws 6W and gives 600lm of cool white light at 4000K, a clear, crisp white that suits hallways, studies and home offices.
Is the Kamarne downlight dimmable?
Yes, it is dimmable, so on a suitable dimmer you can turn it down for a softer light in the evening. It has no switch of its own and is switched at the wall.
Does the downlight need a bulb?
No. The light source is an integrated LED built into the downlight, so there is no separate bulb to buy, fit or replace.
Which material and finish does the downlight have?
The body is aluminium in a satin nickel finish, with a fine brushed texture on the bezel that sits well alongside chrome and brushed steel in the home.