Description
The Jasmin is a round LED ceiling light with a wooden frame finished in matte white, taking two E27 lamps rated up to 20W each. It runs on a standard 220-240V AC mains supply and casts a soft, even wash of light from its 375mm circular body, which sits just 77mm from the ceiling. American buyers will recognise this format as a flush mount LED ceiling light, a low-profile fixture that hugs the ceiling rather than hanging from it.
Its restrained round shape and pale finish suit hallways, landings, bedrooms and smaller living spaces where a neat, close-fitting light is wanted. With its shallow 77mm depth it works well on lower ceilings that would not take a pendant, and the twin E27 sockets let you set the brightness and tone by your choice of lamp. The light spreads broadly across a compact room for general background lighting, making it a sensible pick for everyday spaces rather than a single task area.
The fitting is built around a wooden frame with a matte white finish, giving it a warm yet simple look that fits modern interiors. It is rated IP20, so it is intended for dry indoor rooms only and should be kept clear of bathrooms and any damp or outdoor location. Mounting is straightforward to either ceiling or wall, and at 1.98kg it is light to handle during installation. The two E27 caps accept readily available LED lamps, so output and colour temperature are entirely down to the bulbs you fit.
Specification
| Power |
2 x max 20W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Cap / base |
E27 |
| Light source |
LED |
| Shape |
Round |
| Dimensions |
Ø375 × 77 mm |
| Weight |
1.98 kg |
| Material |
Wood |
| Finish |
Matte White |
Downloads
Frequently Asked
How big a room does this light suit?
With its 375mm round body and two E27 lamp positions, the Jasmin works best in compact spaces such as hallways, landings, bedrooms and smaller living rooms. Because the brightness depends on the lamps you fit, you can match the output to the room by choosing higher or lower wattage E27 LEDs.
Does it take a replaceable bulb?
Yes. The fitting uses two E27 screw caps rated up to 20W each, so you fit your own E27 LED lamps and can replace them as needed. This also lets you select the colour temperature and brightness to suit the room.
Can it be used in a bathroom or outdoors?
No. The Jasmin is rated IP20, which means it is for dry indoor use only. Keep it out of bathrooms, shower areas and any damp or outdoor location.
How do I clean it?
Switch the light off and let the lamps cool, then wipe the matte white wooden frame with a soft, dry or barely damp cloth. Avoid soaking the wood or using harsh solvents, which can mark the finish.