Description
The Jade ceiling fan draws on the folded lines of origami, with blades shaped to move air across a room rather than simply spin above it. At 60 inches, the span suits larger living rooms, open-plan kitchens and generous bedrooms, giving you steady airflow that reaches the corners of the space. The finish is an antique pewter that settles quietly into a room, working with both warm and cooler colour schemes without pulling focus.
An AC motor drives three forward speeds, so you can choose a gentle drift on a mild evening or a stronger current when the weather turns close. There is a reverse mode too, which pushes warm air back down in winter and helps you get more from your heating. Running at 45 dBa, it stays in the background, quiet enough for a bedroom and easy to forget in a busy living room. Everything is handled by the included remote control, so you can adjust speed, direction and the integrated light without leaving your seat. That light is a single 18W LED, giving useful everyday brightness from the centre of the fan.
Fitting is straightforward. A downrod is supplied for standard mounting on flat ceilings, and the fan also works on angled ceilings, so sloped or pitched rooms are covered. The blades are made from ABS, which keeps weight down and holds its shape over time, and the fan carries a limited lifetime guarantee. It is rated for dry interior locations, so keep it to indoor rooms rather than bathrooms or covered outdoor areas. The specification table below lists every measurement you need to plan your fixing point and check the drop before you order.
Specification
| Blade Span |
60 inch / 152cm |
| Fixture Height |
35cm |
| Blade Drop |
32cm |
| Housing Diameter |
23cm |
| Ceiling Pan Diameter |
17cm |
| Downrod Included |
1 x 114mm |
| Mounting Options |
Standard, Angled |
| Fan Speeds |
3 forward speeds, reverse & motor off |
| Control Type |
Remote Control |
| Motor Type |
AC |
| Motor Size |
172mm x 20mm |
| Noise Level |
45 dBA |
| Blade Material |
ABS |
| Integrated Light |
1 x LED 18W |
| IP Rating |
IP20 |
| Safety Rating |
Dry |
| Suitable Location |
Interior |
| Weight |
12.60kg |
| Warranty |
Limited Lifetime |
Frequently Asked
What size room does the 60 inch span suit?
The 60 inch blade span is best for larger rooms such as spacious living rooms, open-plan kitchens and big bedrooms. It moves air across a wide area, so it works well where a smaller fan would struggle to reach the edges of the space.
How is the fan controlled?
A remote control is included. You can adjust the three forward speeds, switch to reverse, turn the motor off and control the integrated light, all without needing a wall switch or pull cord.
How quiet is it in use?
The fan runs at 45 dBa, which keeps it in the background of everyday life. It is quiet enough for a bedroom and easy to ignore in a living room, so you feel the airflow without a noticeable hum.
Can it be fitted to a sloped ceiling?
Yes. It supports both standard and angled mounting, so it can be installed on flat or pitched ceilings. A downrod is supplied to set the correct drop from the ceiling.
Does it help in winter as well as summer?
It does. The three forward speeds cool the room in warmer months, while the reverse mode pushes warm air back down in winter, helping you get more from your heating.
Where can I install this fan?
It is rated for dry interior locations with an IP20 rating, so it is intended for indoor rooms. Avoid bathrooms, covered outdoor areas or anywhere exposed to moisture.