Description
The Jack-Stone is a 790mm LED wall light built around three pebble-shaped diffusers in stainless steel, each finished in a combination of matte and polished gold. The three elements sit at different depths and sizes, with the largest sitting approximately 74mm proud of the wall and the smallest recessed behind it, creating a layered sculptural arrangement. An integrated 13W LED strip behind the diffusers casts 3000K warm-white light onto the wall surface.
Designed for hallways, living rooms and stairwells where a wide horizontal spread of light is needed, the Jack-Stone provides ambient wash rather than directional task light. The 790mm width suits wall spaces of 900mm or wider, such as above a sideboard, flanking a feature wall, or in a wide entrance hall. The IP20 rating restricts use to dry indoor locations only, not bathrooms or outdoor positions.
The matte and polished gold finishes on the stainless steel diffusers create different reflections depending on viewing angle and ambient light, giving the fitting a different appearance in daylight versus when the LED is lit in the evening. The abstract pebble forms protrude asymmetrically from the wall, so the fitting reads more as a wall sculpture with an integrated light source than as a conventional sconce. The stainless steel construction gives the three diffusers a combined weight substantial enough to require secure fixing into masonry or stud, not plasterboard alone.
Specification
| Height |
37.1cm |
| Length |
7.4cm |
| Width |
79cm |
| Finish |
Gold |
| Construction |
Stainless steel |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Wattage |
13 |
| Colour Temperature |
3000K |
| Min Colour Temperature |
3000K |
| Max Colour Temperature |
3000K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
Is the Jack-Stone dimmable?
The integrated 13W LED runs on mains 220-240V AC. Dimmer compatibility depends on the specific dimmer model and wiring configuration. Contact us before pairing with a dimmer to confirm compatibility.
What wall space does it need?
The fitting is 790mm wide and 371mm tall, so it needs a clear wall area of at least 900mm x 450mm to avoid crowding adjacent features. The diffusers protrude up to 74mm from the wall, so allow clearance if the fitting is near doorways or circulation routes.
Can it be used in a bathroom?
No. The IP20 rating restricts the Jack-Stone to dry indoor locations only. It is not protected against moisture and cannot be installed in bathrooms, shower rooms or outdoor positions.
How is the stainless steel cleaned?
Wipe with a dry microfibre cloth to remove dust. For fingerprints or smudges on the polished gold sections, use a barely-damp cloth with distilled water, then dry immediately. Avoid household cleaners, abrasive pads or polishes that can damage the matte finish.