Description
A compact track head finished in white, built around an integrated LED rather than a replaceable lamp. The beam is narrow and well controlled, so light lands where you aim it instead of spilling across the surrounding wall. Output is warm white at 3000K, a tone that sits kindly on timber, plaster and paint. The body is 23cm end to end, reading as a neat cylinder on the track rather than a heavy block.
We reach for heads like this where a room needs punch in particular places: pictures and prints, a run of open shelving, the working end of a kitchen island, stock on display in a shop. The tight beam is the point, so plan positions and aim each head rather than expecting it to wash a whole ceiling. It draws 35W and is not dimmable, so it suits a circuit you are content to switch at full output. We would use it in shops, studios and hallways far more often than in a bedroom.
The driver sits inside the housing and the fitting is double insulated, so no separate control gear is needed alongside it. Cleaning: isolate the circuit, let the head cool, then wipe the body and lens with a dry cloth, keeping polish and sprays away from the optic. It carries a five year warranty. We stock the same head in black, and a cooler white version is offered in both finishes for worktops and artwork that want a crisper light. A honeycomb cover in black is also available for softening glare where heads sit in a sight line. The LED is integrated, so there is no lamp to buy.
Specification
| Colour |
White |
| Weight |
1.00KG |
| Width |
227mm |
| Height |
127mm |
| Materials Used |
Die-cast Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 35W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
50000hrs |
| LED Brand |
Bridgelux |
| LED Power |
35W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
100lm/W (±5%) |
| Beam Angle |
38° |
| System Flux |
3500lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Single Direction |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
35W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Can the LED be replaced?
No. The LED and its driver are built into the head, so there is no lamp to source or swap. It is supplied ready to light at 3000K warm white.
Is it dimmable?
No, this version is non-dimmable. It is designed to be switched on and off at full output, so pair it with a plain switched circuit.
How big is the head?
It measures 227mm wide by 127mm high and weighs about 1kg, which keeps it discreet on a run of track.
How tight is the beam?
The optic gives a 38 degree beam with 3500 lumens behind it, narrow enough for accent work on pictures, shelving and displays.
Is the colour rendering good enough for retail or artwork?
Yes. Colour rendering is above 90, so paint, fabric and skin tones read accurately under it.
Will it suit a bathroom or a covered outdoor area?
No. It is rated IP20 for dry interior rooms only, so keep it to living spaces, shops, studios and hallways.