Free Delivery on all orders over £99*

IP65 Fire-Rated Fixed GU10 Downlight - White

£799
The RRP is the manufacturer's recommended retail price of the item.
330 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge IP65 fire-rated fixed GU10 downlight combines bathroom-grade water resistance with 30/60/90-minute fire protection behind a white pressed-steel bezel. The IP65 rating seals the fitting from below against water jets and dust ingress, making it compliant for use in bathroom zones 1 and 2, while the fire rating meets Building Regulations for ceiling penetrations in solid timber, web-joist and I-joist constructions.

Designed for new builds and retrofit installation, the downlight requires a 69mm cut-out diameter and a minimum ceiling void depth of 167mm to accommodate the rear housing and fire hood. Push-fit terminals accept loop-in/loop-out wiring without requiring a screwdriver, speeding installation across multiple fittings. The unit accepts any GU10 halogen or LED bulb up to 35W (sold separately), with dimming capability dependent on the bulb specification rather than the fitting.

The white finish on the 84mm diameter bezel sits flush with the ceiling surface, projecting only 5mm below the plasterboard or render line once installed. The pressed-steel construction handles the heat dissipation from higher-wattage halogen bulbs, though the fitting also carries IC insulation-contact rating when paired with LED bulbs up to 6W, allowing loft insulation to be packed around the housing without creating a fire risk. Fire certification covers 30-minute protection in web-joist and Staircraft I-joist installations, and extends to 60 and 90 minutes in solid timber ceilings depending on joist depth and specification.

Specification
Diameter 84 mm
Height 92 mm
Projection 5 mm
Recessed Depth 117 mm
Minimum Void 167 mm
Cut-out Diameter 69 mm
Construction Pressed steel
Finish White
Class I
IP Rating IP65 (IP20 from above)
Primary Voltage 230V 50Hz
Lamp Technology Halogen / LED Compatible
Lamp Base GU10
Lamp Included No
Dimmable Lamp dependent
Max. Wattage 35 W
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

Can this be used in a bathroom?

Yes. The IP65 rating from below makes the fitting compliant for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure where water jets are present. The IP20 rating from above means the top of the fitting in the ceiling void is not protected against water ingress, so avoid installation directly below an unlined loft tank or leak-prone area.

What ceiling void depth is required?

A minimum void depth of 167mm is needed to accommodate the rear housing and fire hood. The recessed depth of the fitting body itself is 117mm, with the additional 50mm required for the fire protection hood that sits above the housing in the void.

Does it come with a GU10 bulb?

No, the bulb is sold separately. The fitting accepts any GU10 halogen or LED bulb up to 35W. Most installations use a 5-7W LED GU10 in warm white (2700K-3000K) for general bathroom or kitchen lighting.

Is it dimmable?

Dimming depends on the GU10 bulb you fit, not the downlight housing. If you pair the fitting with a dimmable GU10 LED and a compatible dimmer switch, the installation will dim. Non-dimmable bulbs will not respond to a dimmer even if the fitting itself is capable of handling the load.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard GU10 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge IP65 fire-rated fixed GU10 downlight combines bathroom-grade water resistance with 30/60/90-minute fire protection behind a white pressed-steel bezel. The IP65 rating seals the fitting from below against water jets and dust ingress, making it compliant for use in bathroom zones 1 and 2, while the fire rating meets Building Regulations for ceiling penetrations in solid timber, web-joist and I-joist constructions.

    Designed for new builds and retrofit installation, the downlight requires a 69mm cut-out diameter and a minimum ceiling void depth of 167mm to accommodate the rear housing and fire hood. Push-fit terminals accept loop-in/loop-out wiring without requiring a screwdriver, speeding installation across multiple fittings. The unit accepts any GU10 halogen or LED bulb up to 35W (sold separately), with dimming capability dependent on the bulb specification rather than the fitting.

    The white finish on the 84mm diameter bezel sits flush with the ceiling surface, projecting only 5mm below the plasterboard or render line once installed. The pressed-steel construction handles the heat dissipation from higher-wattage halogen bulbs, though the fitting also carries IC insulation-contact rating when paired with LED bulbs up to 6W, allowing loft insulation to be packed around the housing without creating a fire risk. Fire certification covers 30-minute protection in web-joist and Staircraft I-joist installations, and extends to 60 and 90 minutes in solid timber ceilings depending on joist depth and specification.

    Specification
    Diameter 84 mm
    Height 92 mm
    Projection 5 mm
    Recessed Depth 117 mm
    Minimum Void 167 mm
    Cut-out Diameter 69 mm
    Construction Pressed steel
    Finish White
    Class I
    IP Rating IP65 (IP20 from above)
    Primary Voltage 230V 50Hz
    Lamp Technology Halogen / LED Compatible
    Lamp Base GU10
    Lamp Included No
    Dimmable Lamp dependent
    Max. Wattage 35 W
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    Can this be used in a bathroom?

    Yes. The IP65 rating from below makes the fitting compliant for bathroom zones 1 and 2, including directly above a bath or inside a shower enclosure where water jets are present. The IP20 rating from above means the top of the fitting in the ceiling void is not protected against water ingress, so avoid installation directly below an unlined loft tank or leak-prone area.

    What ceiling void depth is required?

    A minimum void depth of 167mm is needed to accommodate the rear housing and fire hood. The recessed depth of the fitting body itself is 117mm, with the additional 50mm required for the fire protection hood that sits above the housing in the void.

    Does it come with a GU10 bulb?

    No, the bulb is sold separately. The fitting accepts any GU10 halogen or LED bulb up to 35W. Most installations use a 5-7W LED GU10 in warm white (2700K-3000K) for general bathroom or kitchen lighting.

    Is it dimmable?

    Dimming depends on the GU10 bulb you fit, not the downlight housing. If you pair the fitting with a dimmable GU10 LED and a compatible dimmer switch, the installation will dim. Non-dimmable bulbs will not respond to a dimmer even if the fitting itself is capable of handling the load.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.