Inina 4 Light Crystal Semi-Flush Ceiling Light - Polished Chrome

The Inina is a 4 light crystal semi-flush ceiling light built around a polished chrome double-tiered frame that supports cascading strands of faceted octagonal crystal beads and pyramid-shaped prisms. Four E14 bulb fittings (bulbs sold separately) sit inside the upper chrome ring, directing light through and around the crystal layers to create refracted patterns across walls and ceilings.

Designed for rooms with standard 2.4m ceiling heights where a full-drop chandelier would hang too low, the semi-flush construction brings the fitting within 520mm of the ceiling while retaining the visual presence of a suspended crystal light. The 400mm diameter suits dining rooms, hallways, and bedrooms measuring 12-16m². The polished chrome frame provides structural definition against the translucent crystal, creating clear geometric lines where the two materials meet.

Each strand carries between six and eight octagonal crystal beads with pyramid prisms at the terminal points, arranged in graduating lengths to form a tapered silhouette. The crystal components are precision-cut to maximise refraction, so when lit the fitting produces overlapping patterns of dispersed light rather than a single focused beam. The 5.3kg weight requires a ceiling fixing rated for at least 8kg, and the chrome canopy conceals the electrical connection to a standard UK ceiling rose.

The four E14 fittings accept candle or small Edison screw LED bulbs up to 40W each. Pairing the fitting with dimmable LED bulbs and a compatible dimmer allows the light intensity to be adjusted from bright task lighting to low ambient glow, changing how prominently the crystal refracts depending on the time of day and use of the room.

What bulbs does the Inina take?

The fitting takes four E14 (small Edison screw) bulbs up to 40W each. Bulbs are sold separately. Most users pair this with 4-6W warm-white LED candle bulbs at 2700K-3000K for ambient lighting, or higher-output 8-10W LEDs where brighter task lighting is needed.

Is it suitable for low ceilings?

Yes. The semi-flush construction sits 520mm below the ceiling, making it appropriate for standard 2.4m ceiling heights. In rooms lower than 2.3m the fitting may feel visually dominant, but it remains physically clear of head height in typical traffic paths.

Can it be dimmed?

Yes, when paired with dimmable LED bulbs and a compatible dimmer switch. The specification confirms dimmer compatibility, but the dimmer and bulbs must both support dimming — non-dimmable LEDs will not dim and may flicker or fail if connected to a dimmer circuit.

How is the crystal cleaned?

Switch off the power at the consumer unit before cleaning. Wipe each crystal component with a dry microfibre cloth to remove dust. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the crystal or allowing water to run into the chrome frame or electrical fittings.