Description
The Inina is an 88cm-diameter crystal chandelier with 15 E14 bulb positions distributed across a French gold frame, from which multiple tiers of cut crystal strands cascade in a waterfall formation. Each tier consists of faceted crystal octagons and teardrop prisms strung on wire, terminating in individual crystal drops that extend the overall composition to a minimum drop of 2.74m from ceiling to lowest point.
Designed for foyers, entrance halls and double-height stairwells with ceiling heights of 3.5m or higher, the Inina pairs architectural scale with refracted light. The French gold finish on the frame sits between polished brass and antique brass in tone, providing a warm metallic backdrop that contrasts with the clear crystal without competing for visual dominance. The chandelier is dimmable when fitted with dimmable E14 bulbs (sold separately), allowing the intensity to be reduced for ambient evening lighting or increased for formal occasions.
The crystal tiers are hand-assembled onto the gold frame, with each strand wired individually to maintain even distribution and prevent tangling during installation. At 29.7kg the chandelier requires a reinforced ceiling mount rated to carry at least 35kg, and the installation should be checked by a qualified electrician before the fixture is raised into position. The adjustable chain allows the drop to be extended from the minimum 2.74m to a maximum 4.69m, accommodating rooms with ceiling heights between 3.5m and 5.5m depending on the desired clearance below the lowest crystal.
The French gold finish is applied over a solid metal frame rather than plated onto a lightweight base, which gives the chandelier structural rigidity under the combined weight of the crystal and prevents the frame from bowing or deforming over time. The E14 candle bulbs sit within the upper tiers of the chandelier, so the light source is visible when standing beneath the fitting — warm-white filament-effect LED bulbs between 2700K-3000K suit the gold and crystal combination better than cool-white alternatives.
Specification
| Colour Finish 1 |
French Gold |
| Diameter |
880mm |
| Minimum Drop |
2740mm |
| Maximum Drop |
4690mm |
| Number Of Bulbs |
15 |
| Lamp Socket |
E14 |
| Max Wattage |
40W |
| Lamp Included |
No |
| Power Consumption |
Dependent On Lamps Used |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Weight |
29.7KG |
| Warranty |
1 Year |
Frequently Asked
What ceiling height is needed for this chandelier?
The minimum drop from ceiling to the lowest crystal point is 2.74m. Add at least 2.1m clearance below that for comfortable head height in a foyer, meaning a minimum ceiling height of approximately 4.8m is required. Higher ceilings up to 5.5m can be accommodated by extending the chain to the maximum 4.69m drop.
What bulbs does it take?
The chandelier takes 15 E14 (small Edison screw) candle bulbs, each rated up to 40W. Bulbs are sold separately. Warm-white LED bulbs between 4-6W at 2700K-3000K suit the gold and crystal combination. If dimming is required, ensure the bulbs are marked as dimmable and pair them with a compatible dimmer switch.
How is the crystal cleaned?
Switch off the power at the mains before cleaning. Use a dry microfibre cloth to wipe each crystal strand individually, working from the top tier downwards. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the crystals or allowing water to run onto the electrical fittings. Do not use glass cleaner sprays or chemical polishes on the crystal.
Can it be installed on a standard ceiling rose?
No. At 29.7kg the chandelier requires a reinforced ceiling mount rated to at least 35kg. A qualified electrician should assess the ceiling structure and install a suitable mounting bracket or joist support before the chandelier is raised into position. Standard ceiling roses are not rated for this weight and will fail under load.