Infinity CCT Dimmable LED Ceiling Fan Light With Retractable Blades & Remote Control - Black

The Infinity is a 926mm ceiling fan with retractable transparent blades, an integrated 55W tuneable LED light source, and remote control operation. The four blades fold outward from a central matt black housing when the fan is switched on, then retract flush against the body when the fan is off, leaving only the LED light visible. The integrated LED delivers 1800 lumens at a beam angle of 120°, with colour temperature adjustable between 2700K warm white and 5000K daylight via the remote.

Designed for bedrooms, living rooms and open-plan spaces where both ceiling light and air circulation are needed, the Infinity suits rooms of approximately 15-20m². The 310mm height without downrod allows installation in standard UK ceiling heights of 2.4m or above, with an optional 125mm downrod included for higher ceilings. The DC motor runs at near-silent levels while consuming 55W total (fan and light combined), making it more energy-efficient than traditional AC motor ceiling fans. All speed and dimming controls are operated via the included remote — no wall switch wiring is required beyond standard mains connection.

The matt black finish on the motor housing and canopy creates a defined presence against white or light-coloured ceilings, while the transparent retractable blades disappear visually when the fan is off. The retractable mechanism extends the blades to their full span in approximately two seconds once the fan is activated, giving the fitting a dual identity as both a flush ceiling light and a full-diameter fan depending on whether it's in motion. The 3.7kg weight requires secure ceiling fixings into a joist or noggin rather than plasterboard alone.

Can the light be used without the fan running?

Yes. The remote control allows independent operation of the LED light and the fan motor. The light can be switched on, dimmed, and colour-temperature adjusted without activating the fan blades.

What ceiling height is required for safe installation?

The 310mm height without downrod suits ceiling heights of 2.4m or above. For higher ceilings, the included 125mm downrod can be fitted, increasing the total drop to 435mm. The blades require at least 300mm clearance to the nearest wall when fully extended.

How is the colour temperature adjusted?

The integrated LED is tuneable between 2700K warm white and 5000K daylight using the included remote control. The colour temperature can be adjusted while the light is on, allowing it to shift from warm evening light to cooler task light depending on the time of day.

Is the motor noisy at higher speeds?

The DC motor is designed for near-silent operation across all speed settings. At lower speeds the motor is inaudible in a typical bedroom or living room; at maximum speed there is minimal motor hum and the primary sound is airflow from the blades themselves.