Description
Small, cylindrical and finished in satin nickel, this lamp sits at 225mm tall and sends its light upward rather than out across a room. It takes a single GU10 lamp, up to 50W, and an inline switch on the flex puts control within easy reach instead of buried behind a chair. With a dimmable lamp and a compatible dimmer it will soften down. We would reach for an LED reflector in it, which keeps the running cost down and suits the narrow body.
Lamps like this earn their keep in corners, behind a sofa, tucked at the foot of a bookcase or set beside a tall plant so the leaves throw shadows up the wall. The narrow footprint means it disappears on a shelf or a hearth, and because it plugs into a socket you can move it around a room until the light falls where you want it. It suits bedrooms, snugs and hallways where a lamp on a table would take up space you have not got, and it is a quiet way to lift a dark corner without adding another shade.
Satin nickel gives a softer, warmer look than polished chrome, and the fitting is double insulated. Keep it to dry rooms indoors. Cleaning asks very little: with the power off and the lamp cold, run a dry cloth over the finish to lift dust, and skip anything abrasive or damp that could dull the satin sheen. It carries a one year warranty. We would keep the lamp warm white so the wash it throws on the ceiling does not read cold. We stock the same lamp in polished chrome, antique brass and black chrome if nickel is not your metal. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Weight |
0.50KG |
| Diameter |
90mm |
| Height |
225mm |
| Materials Used |
Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Up |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Inline Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Unplug the lamp before cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamp does it take?
One GU10 lamp of up to 50W. A 50mm LED reflector is the sensible choice, and lamps are not supplied with it.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and use a dimmer that is compatible with it. On a standard switch it simply runs at full output.
How large is it?
It measures 90mm in diameter and 225mm high, and weighs around 0.5kg, so it slips into a corner or onto a shelf without dominating.
How is it switched?
There is an inline switch on the flex, so you can turn it on and off without reaching down to the lamp itself.
Can it go in a bathroom or outdoors?
No. It is rated IP20, which limits it to dry rooms inside the house.
How should the satin nickel be cleaned?
A dry cloth is all it needs, used when the lamp is off and cold. Avoid polishes, solvents and scouring pads, which will flatten the satin sheen.