Description
The Hydra is a 176mm diameter LED surface downlight with an integrated 15W LED producing 3000K warm white light through an aluminium housing finished in white. The fitting mounts directly to the ceiling surface without recessing, projecting 90mm below the ceiling line, making it practical for concrete ceilings, ceiling voids with limited depth, or retrofit installations where cutting into the ceiling isn't an option.
Designed for general downlighting in residential kitchens, bathrooms, hallways and commercial interiors, the Hydra carries an IP44 rating allowing safe installation in zones where moisture and occasional water splash are present. The 120° beam angle casts wide, even light across floor areas without hard edges or hotspots, reducing the number of fittings needed to light a typical 12-15m² room. The surface-mount format simplifies installation in new builds and renovation projects alike.
The white powder-coated aluminium housing dissipates LED heat efficiently and pairs neutrally with white ceilings and painted surfaces. The integrated LED runs at 15W on 220-240V AC mains, producing approximately 1200-1350 lumens (exact output listed in Specification). The 3000K colour temperature produces a warm white tone comparable to halogen or traditional incandescent sources, suitable for residential interiors where cooler daylight tones might feel clinical.
Specification
| Height |
9cm |
| Diameter |
17.6cm |
| Finish |
White |
| Construction |
Aluminium |
| IP Rating |
IP44 |
| Voltage |
AC 220-240 |
| Wattage |
15 |
| Colour Temperature |
3000K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
Can this be installed in a bathroom?
Yes. The IP44 rating protects against water splash from any direction, making the Hydra suitable for bathroom installation outside of zones 0 and 1. For positioning above or near a shower or bath, check that the installation point falls within zone 2 or outside the zones entirely, depending on local wiring regulations.
Is the LED replaceable?
No. The LED is integrated into the fitting and is not user-replaceable. The LED is rated for approximately 25,000-30,000 hours of operation, which equates to 15-20 years at typical domestic use levels (4-5 hours per day).
What ceiling depth is needed for installation?
The Hydra is a surface-mount fitting and requires no recess or ceiling void. It fixes directly to the ceiling surface using the mounting plate provided, making it suitable for solid concrete ceilings, shallow voids, or retrofit installations where cutting into the ceiling is impractical.
Is it dimmable?
Dimmer compatibility depends on the specific driver inside the fitting. Most Maytoni integrated LED downlights are not dimmable unless explicitly stated. If dimming is required, contact us before purchase to confirm compatibility with trailing-edge LED dimmers.