Holland 6 Light Wall/Semi-Flush Ceiling Light - Brown/Black Oxide

The Holland is a 6-light wall or semi-flush ceiling fitting, built around six curved metal stems finished in brown and black oxide. Each stem supports a tulip-shaped glass shade in amber and clear tones, housing a G9 bulb (sold separately). The stems extend from a central rectangular wall plate with decorative leaf-form metalwork, and a built-in rocker switch allows the light to be controlled without wiring to a separate wall switch.

Designed to be mounted either on the ceiling as a semi-flush fitting or on the wall as a multi-arm wall light, the Holland suits living rooms, dining rooms, hallways and bedrooms where ambient rather than task lighting is needed. The 540mm width and 730mm overall height make it a prominent feature on a wall, while the 150mm projection keeps it clear of furniture when used as a wall sconce. The six shades distribute light across a wider area than a single-source pendant, reducing hard shadows and creating a softer ambient glow.

The brown and black oxide finish is applied over forged metal, giving a warm, aged appearance that pairs with wood furniture, terracotta, warm greys and earth-toned textiles. The amber-tinted glass diffuses the light from each G9 bulb, softening the output and creating a warm wash across walls and ceilings when lit. The fixture weighs 2.9kg and requires appropriate wall fixings or ceiling rose support depending on the mounting surface. Dimming is supported when paired with dimmable G9 bulbs and a compatible dimmer circuit.

What bulbs does it take?

The Holland takes six G9 capsule bulbs, sold separately. The maximum load is 240W total, which allows up to 40W per socket, though most users pair this with 5-7W LED G9 bulbs in warm white (2700K-3000K) for ambient lighting.

Can it be used as both a wall light and a ceiling light?

Yes. The Holland can be mounted on the wall as a multi-arm sconce or on the ceiling as a semi-flush fitting. The built-in switch works in both configurations, though ceiling mounting typically pairs with a separate wall switch circuit as well for convenience.

Is it dimmable?

Yes, when paired with dimmable G9 bulbs and a compatible dimmer circuit. The built-in switch is an on/off rocker, not a dimmer control, so dimming must be controlled via the circuit or a separate dimmer module.

What wall fixings are needed?

The fitting weighs 2.9kg. For wall mounting, use appropriate fixings for the wall type (plasterboard anchors, masonry plugs, or direct screws into timber studs). The rectangular back plate has multiple fixing points to distribute the load.