HB PRO STRONG Ø300 150W LED High Bay Cool White - Grey

The HB PRO STRONG is a round high bay ceiling light built for tall industrial spaces, drawing 150W to deliver up to 25500 lumens of 4000K cool white light through a wide 90 degree beam. Power is selectable across three settings, 150W, 112.5W and 75W, giving 25500, 19125 or 12750 lumens to suit the mounting height and brightness needed. In the US this format is the standard round LED high bay used over factory floors and storage aisles, run direct from a 220-240V AC supply with an integrated LED engine rather than a replaceable lamp.

Measuring Ø299 by 112mm and weighing 2.02kg, it suits warehouses, workshops, loading bays and covered industrial areas with high ceilings, where the broad beam spreads light evenly down to the working level. At general lighting levels a single unit covers around 42 to 85 m², depending on which power setting is used, so several can be spaced across a larger floor plan. The suspended or ceiling-mounted fitting works well at height, and its IP65 rating means it copes with damp, dusty and exposed conditions that lower-rated fittings cannot.

The body is aluminium alloy in a grey finish, rated IP65 for weatherproofing and IK08 for impact resistance, which makes it durable in busy industrial settings. It dims on a 1-10V signal, so output can be tuned to the task, and the integrated LEDs are rated for 50,000 hours with a colour rendering of Ra 80. It can be suspended from the ceiling or surface mounted directly, and Kanlux supplies the HB PRO STRONG range in matching power options for fitting out a full bay.

What size area does this high bay cover?

At general lighting levels one unit covers around 42 to 85 m², depending on the selected power setting. On full 150W output it produces 25500 lumens, with 19125 or 12750 lumens available on the lower 112.5W and 75W settings. Space several across a larger floor for even coverage.

Can this high bay be dimmed?

Yes, it dims using a 1-10V control signal, so the brightness can be matched to the space and task. The selectable power output also lets you set 150W, 112.5W or 75W at install. This gives flexible control over both light level and energy use.

Is it suitable for damp or exposed locations?

Yes, it carries an IP65 rating, so it withstands dust, damp and direct water in exposed industrial and covered outdoor areas. The IK08 impact rating adds resistance to knocks in busy work environments. The aluminium alloy body supports use over loading bays and similar sites.

How do I clean and maintain it?

Wipe the fitting with a soft, dry or slightly damp cloth once it is switched off and cool, avoiding harsh solvents on the grey aluminium body. The integrated LEDs are rated for 50,000 hours, so there is no lamp to replace. Periodic dusting keeps light output and heat dissipation at their best.