Description
A fitting is only as tidy as its smallest parts. This is a plain flat ring in antique silver, 15mm across and shallow enough to vanish into a joint, made to sit over threaded rod and bed down beneath a nut. The aged treatment gives it a soft, slightly greyed tone rather than a bright polish, so it sits quietly next to older hardware instead of catching the eye. There is nothing electrical about it and no lamp involved; it works purely as a spacer and a bearing surface, and it is supplied singly.
We reach for these when a light is being built up or put back together: seating a shade carrier, taking up a whisker of slack under a thumb nut, or keeping a finished surface from being scuffed by a nut turning against it. They suit anyone reworking a pendant, assembling a fitting from separate parts, or reviving something old that turned up a washer short. Given the price, we would always order a couple more than the job strictly needs, since this is the part that rolls off the bench and is never seen again.
The antique silver finish behaves like all aged finishes and prefers to be left alone. Keep metal polish, cream cleaners and solvents well away from it; a dry cloth lifts any dust, and clean dry hands keep the tone even over time. It carries a one year warranty. Antique silver runs through other Hayes hardware we keep, including the metal cable grip kits, so the small parts of an assembly can be held to a single tone rather than mixed. Pick the finish for the fitting first, then match the fixings and washers to it.
Specification
| Colour |
Antique Silver |
| Weight |
0.01KG |
| Diameter |
15mm |
| Height |
6mm |
| Materials Used |
Iron |
| Lamp Cap |
Non-Electric |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size is this washer?
It measures 15mm in diameter and 6mm in height, so it is a small, low-profile ring rather than a broad plate.
Is it sold on its own or in a pack?
It is supplied as a single piece. If you need several for one assembly, order the quantity you need.
Does it carry any electrical function?
No. It is a non-electrical component, so there is no socket, no lamp and no wiring involved.
How should the antique silver finish be cleaned?
A dry cloth is enough. Polishes, abrasive creams and solvents can strip the aged tone, so avoid them entirely.
Will it match other antique silver parts?
It shares its finish with the antique silver metal cable grip kit in the same range, so hardware can be kept consistent.
Is there a warranty?
It carries a one year warranty.