Description
A tall upright in matt black with a black fabric drum shade sitting 40cm across the top, this is a floor lamp that keeps its lines quiet and lets the light do the work. The shade throws a broad wash downwards over a chair or a side table while the fabric softens what escapes at the sides. A pull switch on the lampholder puts control at hand height, so it needs no reaching for a wall switch across the room.
It stands 165cm tall, which puts the shade above the shoulder of most armchairs and sofas, and it suits a reading corner, the far end of a living room, or a bedroom where a bedside lamp alone leaves the room flat. We reach for it where there is no ceiling point worth using, or where a pendant would sit awkwardly over furniture. It takes a single E27 lamp up to 20W, and an LED GLS globe is what we would put in it. Choose a dimmable lamp and pair it with a compatible dimmer and the output can be brought down for evenings.
The stem, base and lampholder carry the same matt black through, so the frame reads as one piece against the fabric of the shade. The shade itself is fabric backed in black and holds its drum shape without fuss. Keep it looking right with a soft brush or the upholstery head of a vacuum over the fabric, and give the metal an occasional wipe with a dry cloth once the lamp is cold and switched off. It is a lamp for dry rooms indoors and runs from a standard three pin socket, so it can be moved from one corner to another as furniture changes. In black it sits happily alongside timber, leather and pale walls alike. It carries a one year warranty. Lamps are not included.
Specification
| Colour |
Matt Black |
| Weight |
2.60KG |
| Diameter |
400mm |
| Height |
1650mm |
| Materials Used |
Iron, Cotton, PVC |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Pull Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Black |
| Shade Material |
Cotton, PVC |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Plug-in Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Unplug the lamp before cleaning. (3) Remove dust from shade with microfiber cloth, lint roller or upholstery brush. |
| Country of Origin |
China |
Frequently Asked
What size lamp does it take?
One E27 lamp, rated to a maximum of 20W. An LED GLS A60 globe is the recommended choice and gives the most light for the least heat.
How tall is it?
1650mm to the top, with a shade measuring 400mm in diameter.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and use a compatible dimmer. Standard non-dimmable LED lamps will not dim.
How is it switched?
There is a pull switch on the lampholder, operated at the top of the lamp rather than at the wall.
How do I clean the fabric shade?
Brush it gently or use the upholstery attachment on a vacuum at low suction. Avoid water and solvents on the fabric; the black metal can be wiped with a dry cloth.
Is it suitable for a bathroom or outdoors?
No. It is rated IP20 and is intended for dry indoor rooms only.