Description
A light engine rather than a finished fitting: a slim black bar of 1.2m with the LEDs and their driver already inside, made to be linked end to end or built into a host. The output is warm white at 3000K, and the beam is narrow rather than wide, laying a defined band of light below it instead of washing a whole room. Power draw is 38W, and it runs on a plain on-off switch rather than a dimmer.
We use modules like this where the lighting needs to follow a line: along a run of worktop, over a long dining table, above a reception desk, or down the middle of a workshop bench. The tight beam suits high ceilings and tall rooms, where a broader spread would lose its punch before it reached the surface. Because several can be joined into one continuous run, it works as well over a long counter as over a single island. It is a fitting for dry rooms indoors, and not one for a bathroom zone or an outbuilding that gets damp.
The housing is finished in black throughout, narrow enough in section to read as a line of light rather than a piece of hardware, and the LEDs are fixed for the life of the unit, so there is nothing to swap out later. Upkeep is minimal: turn the power off, then run a dry cloth along the body and the lens, keeping cleaning sprays and solvents well away from it. It carries a three year warranty. The wider Hanok range runs to linear pendants and linear ceiling lights in black and white, in a wider beam as well as this narrow one, and we would pair this module with those where a scheme wants both a hung line and a fitted one. The driver is supplied with it.
Specification
| Colour |
Black |
| Weight |
2.80KG |
| Length |
1200mm |
| Width |
48mm |
| Height |
665mm |
| Materials Used |
Aluminium, Iron |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 38W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
50000hrs |
| LED Power |
38W (±5%) |
| Type of LED |
OSRAM3030 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Country of Origin |
China |
| Lumens per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle |
45° |
| System Flux |
2650lm (±5%) |
| CRI |
>90 |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
38W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
50000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
Frequently Asked
What sort of light does it give out?
Warm white at 3000K, with a system output of 2650lm and colour rendering above 90, so wood, food and fabric hold their colour well.
Can it be dimmed?
No. It is a non-dimmable module and should be run from a standard on-off switch rather than a dimmer or trailing edge controller.
What are the dimensions?
It is 1200mm long and 48mm wide, and weighs 2.8kg.
Does it need a separate driver?
No, the driver is built in and supplied with the module. It is Class 2, double insulated.
How narrow is the beam?
45 degrees, which concentrates the light into a band directly beneath the module rather than spreading it sideways.
Can the LEDs be replaced when they fail?
The LEDs are integral to the module and are not user replaceable. They are rated at 50,000 hours of average life.