Description
The Hanok is a 120cm linear LED wall light in matt black with an integrated 38W LED delivering 2850 lumens at 3000K warm white. The fitting measures 1200mm long, 67mm high and projects 70mm from the wall, creating a horizontal or vertical band of light depending on orientation.
Designed for residential living rooms, bedrooms, hallways and commercial reception areas where architectural lighting is needed without recessed ceiling work, the Hanok mounts directly onto a wall via a concealed backplate. The 110° beam angle distributes light evenly across the length of the fitting, providing ambient wash light rather than focused spotlighting. Mounting horizontally above a headboard, sideboard or reception desk creates a wide band of light, while vertical installation alongside doorways or at corridor ends adds architectural definition.
The matt black aluminium housing measures 1.2m in length but weighs only 2.5kg, making it straightforward to mount on plasterboard or masonry with the correct fixings. The 70mm projection keeps the fitting close to the wall, avoiding interference with door swings or furniture placement. The non-dimmable LED runs on standard 220-240V mains and is rated for 3000K colour temperature throughout the fitting's lifespan, maintaining consistent warm white output without colour shift.
The Hanok is part of Mantra's linear LED range designed originally for hospitality and office environments where clean lines and energy efficiency are prioritised. The matt black finish absorbs rather than reflects daylight, reducing glare in bright rooms, and pairs with black window frames, matt black door furniture and dark-toned joinery common in contemporary residential builds.
Specification
| Colour Finish 1 |
Black |
| Length |
1200mm |
| Height |
67mm |
| Projection |
70mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
110° |
| Lumen |
2850lm |
| Power Consumption |
38W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
2.5KG |
| Warranty |
3 Year |
Frequently Asked
Can the Hanok be dimmed?
No. The integrated LED is non-dimmable and runs at full 38W output when switched on. Dimmer compatibility is not supported on this model.
Can it be mounted vertically as well as horizontally?
Yes. The Hanok can be installed horizontally to create a wide band of wash light or vertically alongside doorways, at corridor ends or as an architectural accent. The backplate mounting points accommodate both orientations.
What wall types can it be mounted on?
The fitting weighs 2.5kg and can be mounted on plasterboard with appropriate cavity fixings or directly onto masonry, timber studs or tiled surfaces using the correct screws and plugs for the substrate. The concealed backplate hides all fixings once installed.
What light output does 2850lm provide?
2850 lumens at 3000K warm white is sufficient to provide ambient lighting across a 15-20m² room when used as a primary light source, or to act as accent wash lighting in larger spaces. The 110° beam angle distributes the output evenly along the 1.2m length rather than concentrating it in a narrow spot.