Description
The inner ring is adjustable. The lamp holder tilts inside the bezel, so the beam can be aimed off vertical at a wall or a picture rather than straight down.
A neat white circle sitting close to the ceiling, this one takes a GU10 lamp and gives away very little of itself once the light is on. The trim is 90mm across, so it reads as a small disc rather than a fitting, and the lampholder comes ready in place. We keep it as one of the plainest ways to put directional light into a room where a pendant or a track would be too much.
It earns its keep in kitchens, hallways, landings and box rooms, and in wardrobes, alcoves and shelving recesses where depth is tight. Set in a run, these light a worktop or a corridor evenly; on their own they pick out a doorway or a painting. Fit a dimmable lamp and the light will dim, though the dimmer is bought separately. We would keep it to dry rooms indoors, well away from shower zones and open porches.
The body is finished white right to the edge of the trim, which lets it sit quietly against a painted ceiling and keeps the eye on the light rather than the fitting. It is double insulated. Cleaning asks little: with the power off and the lamp cold, run a dry cloth over the white face and lift any dust from the rim with a soft brush, keeping moisture away from the aperture. A reflector LED suits it best and the lamp rating tops out at 12W. It carries a two year warranty. The same flush design is also offered as a square, in white and in black, and the range runs on to deeper funnel shapes if you would rather the lamp sat further back. Lamps are not included.
Specification
| Colour |
White |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.04KG |
| Diameter |
90cm |
| Height |
29cm |
| Cut Out |
75mm |
| Materials Used |
Polycarbonate |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is the aperture compared with the visible trim?
The aperture measures 75mm, while the trim covers 90mm overall, so the white ring hides the edge of the opening.
Which lamp should I buy for it?
It takes a GU10 lamp up to 12W, and an LED reflector of 50mm diameter is the recommended choice. No lamp is supplied.
Can the light be dimmed?
Yes, provided you fit a dimmable GU10 lamp and use a compatible dimmer. Neither the lamp nor the dimmer is included.
Is it suitable for a bathroom?
No. With an IP20 rating it belongs in dry rooms such as kitchens, halls, landings and bedrooms rather than in shower or bath zones.
How is it kept clean?
Switch the power off and let the lamp cool, then wipe the white trim with a dry cloth. Avoid damp cloths and sprays around the opening.
Is there a warranty?
It carries a two year warranty.