Description
The Gronanne LED ground light is a small, round light that sits flush with the ground, with a brushed stainless steel top ring fixed by four screws around a white satin glass diffuser. It is 10cm across and needs 6.5cm of depth beneath the surface, with a 9cm cut-out. The LED is integrated, drawing 2.5W for 230 lumens of warm white light at 3000K. Its IP65 and IP67 ratings settle where it can go: it is sealed against dust and copes with jets of water and brief immersion, so it belongs outdoors, set into the ground.
We like it along the edge of a gravel path, picking out a border or marking the line of a terrace, where low light guides the way after dark without lighting the whole garden. Because the top sits flush, there is no raised edge to catch a foot, and it takes a load of up to 500kg, enough for people walking across it. The warm white at 3000K flatters stone, gravel and planting, giving a soft pool of light rather than the glare of a floodlight. It suits anyone who wants the garden to read clearly at night while the light itself stays almost out of sight.
The body is stainless steel, a material that resists rust, and the satin glass spreads the light from the LEDs into an even, softly lit disc. It runs from the mains at 220-230V, 50/60Hz, carries an energy class of F and has no switch of its own: it is switched at the wall, and since it is not dimmable, a standard switch suits it rather than a dimmer. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions are available as a download. Before ordering, check there is 6.5cm of depth beneath the surface at every point where you want a light.
Specification
| Diameter |
10cm |
| Body Material |
Stainless steel |
| Body Colour |
Stainless steel |
| Shade Material |
Satin glass |
| Shade Colour |
White |
| Light Source |
LED, integrated |
| Wattage |
2.5W |
| Lumens |
230lm |
| Colour Temperature |
3000K |
| Dimmable |
No |
| Features |
Observe weight - max. 500kg |
| Switch |
None (switched at the wall) |
| IP Rating |
IP65, IP67 |
| Protection Class |
Class II |
| Voltage |
220-230V, 50/60Hz |
| Energy Class |
F |
| Recess Depth |
6.5cm |
| Cut-Out |
9cm |
| Weight (packed) |
0.414KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can this ground light be set into a garden path?
Yes. With IP65 and IP67 ratings, it is sealed against dust and copes with jets of water and brief immersion, so it suits paths, borders and terraces outdoors.
How much weight can the top take?
The top takes a load of up to 500kg, so people can walk across it. Keep within that limit when choosing where it goes.
How bright is the light, and what colour is it?
The integrated LED draws 2.5W and gives 230 lumens of warm white light at 3000K, a soft glow for marking a path rather than floodlighting a garden.
Is the ground light dimmable?
No, it is not dimmable. It has no switch of its own and is switched at the wall, so use a standard switch rather than a dimmer.
What size hole does it need?
It is 10cm across, needs a 9cm cut-out and has a recess depth of 6.5cm, so check there is enough depth beneath the surface first.
Which materials are the ring and diffuser?
The body and top ring are stainless steel with a brushed finish, and the diffuser is white satin glass, which spreads the LEDs into an even light.