Gloara Outdoor Bollard Light - Anthracite, 80cm

The Gloara is an 80cm outdoor bollard light finished in anthracite powder-coated metal with a 205mm diameter head containing a white plastic diffuser. The diffuser houses four G9 bulb sockets (bulbs sold separately) and directs light downwards onto pathways, driveways and garden borders. The IP44 rating protects internal components from dust ingress and water splashes from any direction, making the bollard suitable for year-round outdoor use in UK weather.

Designed for pathway lighting and perimeter illumination in residential gardens, hospitality terraces and commercial landscaping, the 80cm height positions the light source above typical plantings and ground-level obstructions. The downward beam pattern minimises glare for pedestrians while providing functional visibility along walkways and steps. The bollard requires a buried cable run and a stable base mounting, either surface-fixed to paving or embedded into a concrete footing for softer ground.

The anthracite finish is a dark grey metal tone that reads close to black in low light but shows a softer charcoal appearance in daylight. The powder-coat process fuses a polymer resin to the metal substrate, providing better UV and corrosion resistance than wet paint finishes. The white diffuser prevents direct view of the bulbs when passing the bollard, reducing light pollution and directing output downwards rather than sideways into neighbouring properties or planting beds.

The four-bulb configuration with G9 halogen or LED capsules allows total output to be scaled by bulb choice — four 3W LEDs deliver approximately 1,200 lumens, while four 40W halogens push 2,000+ lumens for higher-traffic areas. Dimmable bulbs paired with a compatible outdoor dimmer system allow light levels to be reduced in late evening or raised for events and gatherings.

What bulbs does the Gloara take?

The bollard takes four G9 capsule bulbs, sold separately. You can use G9 halogen capsules up to 40W each, or G9 LED equivalents for lower running costs. Choose warm white (2700K-3000K) for pathway lighting.

Is it suitable for coastal or exposed locations?

The IP44 rating protects against water splashes and dust but does not make the bollard fully weatherproof against driving rain or submersion. In coastal areas with salt spray, rinse the powder-coated surface periodically with fresh water to prevent salt build-up that can accelerate corrosion over time.

How is it installed?

The bollard requires a buried electrical cable (typically armoured SWA cable) run from an outdoor circuit. The base mounts via fixing holes, either bolted to paving or set into a concrete footing for soft ground. Installation should be carried out by a qualified electrician to comply with BS 7671 outdoor wiring regulations.

Can the light output be adjusted?

Yes, if paired with dimmable G9 bulbs and a compatible outdoor dimmer on the circuit. The bollard itself is dimmable-ready but requires the external dimming infrastructure to function.