Description
Light and air from a single ceiling point. The body is white, the diffuser clear glass, and a DC fan sits built into the fitting with a remote handling both the lamp and the airflow. The LED is integrated and dims smoothly, and the white can be tuned from warm through to cool, so the same fitting reads soft late in the evening and crisp first thing. Across its widest point it measures 91cm. We reach for it in rooms where a fan and a pendant would otherwise compete for the same spot.
That makes it a sensible choice for bedrooms, sitting rooms and home offices that get stuffy in summer, and for open-plan spaces where a single point has to serve both jobs. Because the remote covers switching, dimming and the colour shift, you are not tied to a wall dimmer, though it will happily sit on an existing lighting circuit. Draw is 36W on the light side, so running it long into the evening costs little. Keep it to dry indoor rooms: a shower room or a covered porch calls for something rated for damp.
Glass does the visible work here, clear where it meets the light and white across the body. Cleaning takes little effort: cut the power, let the glass lose its heat, run a dry duster over the fan, then finish the glass with a barely damp cloth and dry it straight away. Nothing abrasive, and no sprays. It carries a five year warranty. The LED and its driver are built in, so there is nothing further to buy. We would keep the rest of the room's fittings plain and let this one hold the ceiling.
Specification
| Colour |
White |
| Second Colour |
Clear |
| Weight |
4.80KG |
| Diameter |
440/910mm |
| Height |
300/425mm |
| Materials Used |
Iron, PC, PS |
| Energy Class |
D |
| Energy Class of Lamp |
Group C |
| Max Energy Class |
D |
| Min Energy Class |
D |
| Lamp |
1 x 36W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
36W (±5%) |
| Lumens per Watt (lm/W) |
159lm/W (±5%) |
| System Flux |
5710lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
61W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00234 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How bright is it, and can I change the colour of the light?
The integrated LED produces around 5710 lumens and is tuneable from 3000K warm white up to 5000K cool white, adjusted from the supplied remote along with dimming.
What are the two diameters quoted?
The glass light section measures 440mm across, while the fan reaches 910mm at its widest. Overall height is given as 300mm for the light body and 425mm with the fan section included.
Do I need a separate dimmer or wall control?
No. Switching, dimming and the colour temperature change are all handled by the remote control that comes with it.
How long should the LED last?
It is rated at around 25,000 hours of average life, so in a typical room it should run for many years before output falls away.
How heavy is it?
It weighs 4.8kg.
How do I clean the glass without marking it?
Switch off at the wall first and let the glass cool. Dust with a dry cloth, then use a barely damp cloth on any marks and dry immediately. Avoid abrasive creams and household sprays.