Description
A very small recessed light with a head that swivels and retracts into its housing, so the beam can be tilted towards a picture, a worktop edge or a shelf run rather than dropped straight down. The integrated LED draws 7W and gives a warm 2700K light, close in colour to an old filament lamp, and the driver is supplied with it. The beam is tight rather than broad, so light lands where you aim it. It is not dimmable, so we would wire it to a plain switch.
The 45mm cut-out is the point of it: it goes into tight ceilings, alcove soffits, wardrobe tops and joinery where a full-size downlight would sit heavy. We use these where someone wants light on the work without a row of broad bezels overhead, so kitchens, hallways, dressing rooms and the underside of shelving. Rated for dry indoor rooms, it belongs inside, away from shower zones and open porches. It also earns its keep as a quiet accent beside a larger scheme, picking out one object without lighting the whole room.
The housing and bezel are black throughout, head included, which keeps the fitting reading as a small dark dot rather than a bright ring in the ceiling line. It is double insulated. For cleaning, switch off at the mains, then wipe the visible rim and lens with a dry cloth; nothing wet and no polish near the finish. It carries a three year warranty. The same warm white output is stocked in white if you would rather the fitting disappeared into a painted ceiling, and there are lower-output versions on a narrower cut-out in the range for still tighter spots, along with cooler whites. The LED is built in, so there is no lamp to buy.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.18KG |
| Diameter |
53mm |
| Height |
95mm |
| Cut Out |
45mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 7W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Brand |
CREE |
| LED Power |
7W (±5%) |
| Type of LED |
COB |
| Lumens per Watt (lm/W) |
74lm/W (±5%) |
| Beam Angle |
36° |
| System Flux |
515lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it give?
Around 515 lumens at 7W, in a warm white 2700K tone. In a narrow beam of roughly 36 degrees, that is enough to pick out a picture, a shelf or a small section of worktop.
What size hole does it need and how deep is it?
The cut-out is 45mm, the visible bezel measures 53mm across, and the body stands 95mm tall, so allow for that depth plus room for the driver above.
Can the beam be angled?
Yes. The head swivels and retracts into the housing, so you can drop it slightly and tilt it to aim the light rather than being fixed straight down.
Will it work on a dimmer?
No, this version is non-dimmable and should be run from a standard switch. Putting it on a dimmer circuit risks flicker and shortens the life of the electronics.
Do I need to buy a driver or a lamp?
Neither. The LED is integrated and the driver is included in the box.
Is it suitable for a bathroom?
We would keep it to dry rooms. For a bathroom ceiling within the splash zones, choose a fitting with a moisture rating instead.