Fulton Outdoor LED Rectangular Wall Light - White

The Fulton is a 10cm cube outdoor wall light built from powder-coated aluminium with an integrated 6W 3000K LED. The fixture casts light both upward and downward through adjustable internal shutters that control the angle and spread of the beam, allowing the light pattern to be set to suit the wall surface and surrounding architecture.

Designed for external walls on residential, hospitality and commercial buildings, the Fulton works as an entrance marker, pathway accent or architectural feature light where up/down wash is needed. The IP54 rating provides protection against dust ingress and water splashing from any direction, making the fitting suitable for covered porches, under eaves, on courtyard walls and in sheltered outdoor corridors. The white powder-coated finish pairs with render, painted masonry and cladding in contemporary and coastal settings.

The cube body is 10cm on all sides with concealed fixing bolts that sit behind the faceplate once installed, leaving a clean geometric profile on the wall. The aluminium construction resists corrosion in damp and coastal climates better than painted mild steel. The integrated LED runs on universal 100-240V AC input and provides warm white light at 3000K, which reduces blue wavelengths and minimises light pollution compared to cooler LEDs.

Product Manual

Can the light direction be adjusted after installation?

Yes. The internal shutters can be repositioned to control the upward and downward light spread, allowing you to adjust the beam angle and pattern on the wall surface without removing the fitting.

Is the Fulton suitable for exposed outdoor locations?

The IP54 rating protects against dust and water splashing, making the fitting suitable for covered outdoor areas such as under eaves, on porches and in sheltered courtyards. It is not rated for fully exposed positions subject to direct heavy rain or submersion.

What colour is the light output?

The integrated LED produces warm white light at 3000K, which gives a softer, amber-toned appearance compared to cooler daylight-spectrum LEDs. This reduces blue light and minimises light pollution in residential outdoor settings.

How is the Fulton mounted to the wall?

The fixture fixes to the wall using concealed bolts that sit behind the faceplate once installed. Mains cable is fed through the back of the cube into the internal terminal block. Installation requires qualified electrician work to comply with Part P Building Regulations.