Description
The Fritz is a 60cm linear LED pendant light built from three flat metal beam arms that meet at a central polished gold cylinder. An integrated 12W 3000K LED runs along the underside of each arm, with a frosted opal diffuser at the lower edge of the central hub. The arms sit at offset angles rather than a flat plane, giving the pendant a sculptural, propeller-like silhouette when viewed from below.
Designed for dining tables, kitchen islands, hallways and open-plan living spaces, the Fritz is a single-fitting solution where a longer linear bar would feel too rigid. Each beam arm is suspended on its own fine cable, so the pendant is supported at three outer points plus the central power feed. The cables are adjustable on installation, letting the pendant be set 700-900mm above a dining surface or higher in a hallway or stairwell.
The matte gold finish on the outer faces of the beams contrasts with the polished gold central cylinder, giving the fitting two distinct tonal qualities under light. The 12cm overall height keeps the pendant relatively shallow despite its 60cm spread, which suits rooms with standard 2.4m ceilings. The integrated LED is fixed at 3000K warm white, producing soft ambient light without the cooler tone of higher-Kelvin sources.
Specification
| Height |
12cm |
| Diameter |
60cm |
| Wattage |
12W LED 3000K |
| Material |
Metal |
| Warranty |
2 Year |
Frequently Asked
Does it come with a bulb?
No separate bulb is needed. The Fritz uses an integrated 12W LED at 3000K warm white, built into the fitting and not user-replaceable.
Is the suspension height adjustable?
Yes. The pendant hangs on fine cables that are adjusted on installation, allowing the drop to be set for the ceiling height and surface below. For dining tables and kitchen islands, 700-900mm above the surface is typical.
What size room does it suit?
With a 60cm spread, the Fritz suits dining tables 1.2-1.8m long, kitchen islands of similar length, or hallways and entrance areas where a single decorative pendant is needed. In larger rooms it can be paired with matching wall or ceiling fittings.
Is the LED dimmable?
The Specification tab does not list dimmer compatibility. Please contact us before pairing with a dimmer so we can confirm whether the integrated driver is suitable for your dimmer model.