Description
The Fogler is a round LED ceiling light that sits flush against the surface for a clean, low-profile look. It draws 14W and puts out 800 lumens of neutral 4000K white light, with a wide 110 degree beam that spreads evenly across the room rather than pooling in one spot. American buyers will recognise this format as a flush mount LED ceiling light, the integrated style that replaces an older pendant or fixed shade. At Ø290mm and just 80mm deep, it keeps its profile tight to the ceiling and the LED is built in, so there is no separate bulb to fit or swap.
Its 800 lumen output and even spread suit smaller indoor spaces, covering around 3 m² at general lighting levels, which makes it a sensible fit for a hallway, a landing, a compact bedroom or a small home office. The shallow 80mm depth helps where headroom is limited or a low ceiling rules out a hanging fitting. Because it is rated IP20, the Fogler is for dry interior rooms only and should be kept indoors, away from bathrooms and any damp location. For larger or task-heavy rooms you may want to pair two units to lift the overall brightness.
The body is steel finished in white, so it reads neutral against most ceilings and brushes clean with a dry or lightly damp cloth. With its integrated LED the fitting carries a rated life of 20,000 hours, and at 630g it is light enough for straightforward fixing to a wall or ceiling. It runs on 220 to 240V mains and is not dimmable, so it pairs best with a standard on/off switch. The Fogler 14W sits within a wider Fogler range of round ceiling fittings if you need matching pieces across several rooms.
Specification
| Power |
14W |
| Voltage |
220-240 AC |
| Luminous flux |
800 lm |
| Efficiency |
57 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
110° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
20,000 hours |
| Shape |
Round |
| Dimensions |
Ø290 × 80 mm |
| Weight |
630 g |
| Material |
Steel |
| Finish |
White |
Downloads
Frequently Asked
What size room does this suit?
With 800 lumens spread through a wide 110 degree beam, the Fogler covers around 3 m² at general lighting levels. That makes it well matched to a hallway, landing, small bedroom or compact home office. For larger or task-focused rooms, fitting a second unit will raise the overall brightness.
Is the Fogler dimmable?
No, this fitting is not dimmable and is designed to run on a standard on/off switch. Wiring it to a dimmer is not recommended as it can cause flicker or buzzing. If you want adjustable brightness, choose a model rated as dimmable instead.
Does it take a replaceable bulb?
No, the LED is integrated into the fitting, so there is no separate bulb to fit or change. The unit is rated for 20,000 hours of use, which is many years at typical household run times. When that life is reached the whole fitting is replaced rather than just a lamp.
How do I clean the Fogler?
Wipe the white steel body with a dry or lightly damp cloth, then dry it off. Avoid harsh solvents or abrasive cleaners, which can mark the white finish. Always switch off at the wall and let the fitting cool before cleaning.