Free Delivery on all orders over £99*
Save 28%

Focus Round Recessed LED Downlight - 10W 3000K White

£2499
RRP £3480
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Focus is a 118mm diameter recessed LED downlight with a white aluminium trim ring and an integrated 10W LED module running at 3000K. The LED sits behind a flush opal diffuser that spreads light evenly across the ceiling plane without glare or visible lamp source. The fitting installs into a ceiling void, leaving only the trim ring and diffuser visible from below.

Designed for commercial and residential applications where ceiling-mounted ambient lighting is needed without surface-mounted fittings, the Focus suits offices, retail spaces, corridors, kitchens and living rooms with adequate ceiling void depth. The 10W LED output provides approximately 800-900 lumens (depending on driver efficiency), which is sufficient for general ambient coverage in rooms up to 10-12m² when used as part of a multi-downlight layout. The IP20 rating limits the fitting to dry indoor locations only.

The aluminium construction and white powder-coat finish give the downlight a clean profile that integrates into white or light-coloured ceilings without drawing visual attention. The 3000K colour temperature sits at the warm end of neutral white, providing a softer ambient tone than cooler 4000K or 6500K commercial downlights. The fitting is non-dimmable and draws power directly from mains via a built-in driver, so no external control gear is required during installation.

Specification
Diameter (mm) 118
Dimmable No
Number Of Bulbs 1
Bulb Type LED
Colour Temperature 3000K
IP Rating IP20
Warranty 5 Years
Frequently Asked

Is the Focus dimmable?

No. The integrated LED driver does not support dimming. If dimmer control is required, consider a downlight with a DALI or phase-dimmable driver instead.

What ceiling void depth is required?

Recessed downlights typically require a minimum void depth of 100-150mm above the ceiling surface to accommodate the LED module, driver and heat dissipation. Consult a qualified electrician to confirm the ceiling structure can accommodate the fitting before ordering.

Can this be used in bathrooms?

No. The IP20 rating means the fitting is not splash-proof or moisture-resistant. For bathroom zones 1, 2 or 3, an IP44-rated or higher downlight is required.

How bright is the 10W LED?

A 10W LED typically delivers 800-900 lumens, which is roughly equivalent to a 60W incandescent bulb. For general ambient lighting, one Focus downlight covers approximately 3-4m² of floor space when spaced evenly across a ceiling grid.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Focus is a 118mm diameter recessed LED downlight with a white aluminium trim ring and an integrated 10W LED module running at 3000K. The LED sits behind a flush opal diffuser that spreads light evenly across the ceiling plane without glare or visible lamp source. The fitting installs into a ceiling void, leaving only the trim ring and diffuser visible from below.

    Designed for commercial and residential applications where ceiling-mounted ambient lighting is needed without surface-mounted fittings, the Focus suits offices, retail spaces, corridors, kitchens and living rooms with adequate ceiling void depth. The 10W LED output provides approximately 800-900 lumens (depending on driver efficiency), which is sufficient for general ambient coverage in rooms up to 10-12m² when used as part of a multi-downlight layout. The IP20 rating limits the fitting to dry indoor locations only.

    The aluminium construction and white powder-coat finish give the downlight a clean profile that integrates into white or light-coloured ceilings without drawing visual attention. The 3000K colour temperature sits at the warm end of neutral white, providing a softer ambient tone than cooler 4000K or 6500K commercial downlights. The fitting is non-dimmable and draws power directly from mains via a built-in driver, so no external control gear is required during installation.

    Specification
    Diameter (mm) 118
    Dimmable No
    Number Of Bulbs 1
    Bulb Type LED
    Colour Temperature 3000K
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    Is the Focus dimmable?

    No. The integrated LED driver does not support dimming. If dimmer control is required, consider a downlight with a DALI or phase-dimmable driver instead.

    What ceiling void depth is required?

    Recessed downlights typically require a minimum void depth of 100-150mm above the ceiling surface to accommodate the LED module, driver and heat dissipation. Consult a qualified electrician to confirm the ceiling structure can accommodate the fitting before ordering.

    Can this be used in bathrooms?

    No. The IP20 rating means the fitting is not splash-proof or moisture-resistant. For bathroom zones 1, 2 or 3, an IP44-rated or higher downlight is required.

    How bright is the 10W LED?

    A 10W LED typically delivers 800-900 lumens, which is roughly equivalent to a 60W incandescent bulb. For general ambient lighting, one Focus downlight covers approximately 3-4m² of floor space when spaced evenly across a ceiling grid.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.