Description
The Fino is a 52cm LED picture light with an integrated 12.1W 3000K LED tube housed in a polished chrome metal body. The light bar mounts on an adjustable swivel hinge fixed to a rectangular chrome backplate, allowing the beam angle to be tilted toward the artwork or mirror below. A polycarbonate diffuser runs the length of the tube to soften the output and prevent glare on glass-framed pictures.
Designed for artwork, framed prints and mirrors in residential and commercial settings, the Fino provides focused downward illumination rather than general ambient light. The 52cm length suits artwork widths between 40cm and 70cm, with the light positioned centrally above the frame. The swivel joint allows adjustment after installation to direct the beam precisely onto the picture surface without casting shadows from the frame edge.
The polished chrome finish provides a reflective metallic surface that pairs with contemporary and traditional frame styles in chrome, silver, brushed nickel or glass. The integrated LED delivers 12.1W output at a warm 3000K colour temperature, which minimises blue-toned shift in colour photographs and oil paintings. The IP20 rating restricts use to dry indoor locations away from moisture.
The backplate measures 20cm wide by 11cm tall and fixes to the wall above the picture with two screws concealed behind the plate once mounted. Wiring connects through a cable entry point on the rear of the backplate to a mains supply. The fixture weighs approximately 900g once fitted and requires wall fixings appropriate to the substrate — plasterboard installations benefit from wall anchors rated to 2kg minimum.
Specification
| Height |
11cm |
| Length |
52cm |
| Width |
20cm |
| Max Height |
4.8cm |
| Min Height |
4.8cm |
| Finish |
Chrome |
| Construction |
Metal |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Wattage |
12.1 |
| Colour Temperature |
3000K |
| Min Colour Temperature |
3000K |
| Warranty |
3 Year Guarantee |
Downloads
Product Manual
Frequently Asked
What size artwork does the Fino suit?
The 52cm length works best with artwork or mirrors between 40cm and 70cm wide, positioned centrally above the frame. For wider pieces, two Fino lights can be used side by side.
Can the light angle be adjusted after installation?
Yes. The swivel hinge allows the light bar to be tilted up or down after mounting, so you can direct the beam precisely onto the artwork surface and adjust it later if the picture is changed.
Is the LED replaceable?
No. The Fino uses an integrated LED module rated at 12.1W. The LED is not user-replaceable, but LED technology typically provides 20,000-30,000 hours of life before noticeable degradation.
Can it be used in bathrooms?
No. The IP20 rating means the Fino is not protected against moisture and must be installed in dry indoor locations only, away from bathrooms, wet rooms and exterior walls prone to condensation.