Description
The Fernhaven tapered wall light pairs a vintage brass arm with white marble and a tapered shade, standing 280mm tall, 130mm wide and coming 190mm off the wall. Of the Fernhaven wall lights this is the widest projection, which means the light lands further out into the room and away from the plaster. One E14 LED lamp at 7W sits under the shade, and the fitting weighs 0.6kg.
The extra reach makes this the one to choose above a reading chair, over a desk or at a bedside where you want light on the page rather than a wash on the wall behind you. It suits halls and landings too, where a shallow fitting can leave the floor dim. One on its own suits a chair in a corner, while a pair at matching heights works better either side of a bed. It is dimmable with a compatible LED lamp and dimmer switch, so the same wall sconce reads bright for reading and low for the rest of the evening. We would choose this one of the four Fernhaven wall lights where reading light matters most.
Brass and white marble is a quiet pairing: the stone brings a cool matt note that keeps the metal from looking heavy, and the tapered shade above softens the edge of the light. The shade also holds the lamp out of sight, so nobody sitting under it catches a bare bulb in the eye. Dust the marble with a dry soft cloth and keep acidic cleaners, vinegar and bathroom sprays well away, as they etch stone. The Fernhaven range runs to table lamps and floor lamps in the same materials.
Specification
| Bulb Fitting |
1 x E14 |
| Maximum Wattage |
7W (7W per lamp) |
| Dimmable |
Yes |
| IP Rating |
IP20 |
| Class |
Class 1 (earthed) |
| Projection |
190mm |
| Height |
280mm |
| Width |
130mm |
| Weight |
0.6kg |
| Materials |
Metal |
| Finish |
Brass White Marble |
| Warranty |
2 Year |
Frequently Asked
What is the Fernhaven tapered wall light made from?
A metal arm and backplate in a vintage brass finish with white marble detail, under a tapered shade.
How far does it project?
190mm, the deepest reach of the Fernhaven wall lights, with a height of 280mm and a width of 130mm.
How do I clean marble safely?
A dry soft cloth, or a barely damp one for marks. Never use vinegar, lemon or acidic bathroom sprays, which etch the surface.
Which bulb does it take?
One E14 lamp at up to 7W. Pair a dimmable LED lamp with a compatible dimmer and it runs from bright to low.
Is it right for reading in bed?
Yes. The 190mm projection puts the light out over the page rather than behind your shoulder.
Can it go in a bathroom?
No. It is rated IP20 for dry rooms only, which also protects the marble.