EVALO 260x260 4x GU10 Round Ceiling Light - White

The Evalo is a round-fronted ceiling light built around four GU10 lamp positions, each taking a max 10W PAR16 lamp, so output and colour temperature are set by the bulbs you choose rather than fixed at the fitting. It runs on 220-240V AC mains and groups four directional spots in one compact 265 x 265 mm housing. American buyers will recognise this multi-head format as a flush mount ceiling light, here gathered into a single square-edged round-detail plate that reads cleanly against a flat ceiling.

The four-lamp layout suits living rooms, hallways and bedrooms where a single point of light leaves corners dim, and the angled GU10 positions let you push light across a wider footprint than one central fitting. With GU10 lamps fitted the spread covers a typical small-to-mid room comfortably, and you can bias the heads toward a seating zone, a worktop run or a feature wall. It is rated IP20 for dry indoor use only, so keep it to interior ceilings and clear of bathrooms, porches and any damp location.

The body is aluminium alloy in a white finish, measuring 265 x 265 x 120 mm and weighing 1.23 kg, with both wall-mounted and ceiling-mounted fixing supported. There is no integrated LED module, so the four GU10 lamps are replaceable, and dimming depends on the lamps and switch you pair with it. The white plate keeps it low-key on plain ceilings. Other finishes and sizes sit within the wider Evalo range from Kanlux.

How many lumens does it give and what room size does it suit?

Output depends on the four GU10 lamps you fit, since the fitting itself has no integrated LED. With four max 10W lamps it suits small to mid-sized living rooms, hallways and bedrooms, and you can angle the heads to cover wider or task-focused areas.

Is it dimmable?

Dimming is set by the GU10 lamps and the switch rather than the fitting. Choose dimmable GU10 lamps and pair them with a compatible LED dimmer to dim the light. Standard non-dimmable lamps will run on a normal switch only.

Can it be used outdoors or in a bathroom?

No. It carries an IP20 rating, which means dry indoor use only. Keep it clear of bathrooms, showers, porches and any damp or outdoor location, and fit it to interior ceilings or walls instead.

How do I clean it?

Switch off and let the lamps cool, then wipe the white aluminium housing with a soft, dry or slightly damp cloth. Avoid solvents and abrasive cleaners so the finish stays intact, and never use a wet cloth near the GU10 lamp holders.