Erinus Round 0.8W 12V LED Step Light Ø80 Warm White - Black

The Erinus is a compact round LED step light that recesses into the wall to mark a route at low level. It draws just 0.8W on a 12V DC supply and puts out 15 lumens at a warm 3000K, so the effect is a soft marking glow rather than broad illumination. The body measures only Ø75 mm and sits flush once installed, with the light washing gently down across the tread or floor below. American buyers will know this small recessed format as a step light too, used to pick out stairs and edges without floodlighting the space.

This fitting suits indoor stairways, hallway skirting runs, landings and the low wall beside a flight of steps, where the job is to make each step readable underfoot at night. Because it gives a focused marking wash rather than ambient room lighting, think of it as edge and route definition rather than a way to light a whole area, so spacing several units down a staircase gives an even line of light. It carries an IP20 rating, which means it is for dry indoor positions only and should be kept clear of bathrooms, porches and any outdoor or damp location. Mount it at a consistent height on each step or wall section so the run looks uniform.

Construction is plastic with a black finish, keeping the visible trim discreet against darker walls and step risers. The fitting runs on 12V DC, so it needs a suitable low-voltage supply rather than connecting straight to mains. It recesses into the wall for a flush, built-in look and is not dimmable, switching simply on and off. The integrated LED is rated to around 30,000 hours, so there is no lamp to replace over its working life. The Erinus is also offered in other finishes and colour temperatures within the range, letting you match it to a given scheme.

Does this step light need a transformer or driver?

Yes. The Erinus runs on 12V DC, so it must be powered from a suitable low-voltage supply rather than wired directly to mains. Size the transformer or driver to cover the combined wattage of every fitting on the circuit, allowing a little headroom.

Can it be used outdoors or in a bathroom?

No. This version is rated IP20, which means dry indoor use only. Keep it away from bathrooms, porches, gardens and any damp or exposed position, and choose a higher-rated fitting for those locations.

How is it installed?

It is a recessed mount that sits within the wall, so it needs a suitable recess prepared at the chosen height. Once fitted the trim sits flush, giving a built-in look down a staircase or along a low wall.

How do I clean it?

Wipe the visible trim with a soft, slightly damp cloth and dry it off. Avoid harsh solvents or abrasive pads on the plastic finish, and never spray cleaner directly into the fitting.