ENALI Ø80 10W GU10 Ceiling Light - White

The Enali is a compact round ceiling light that also mounts to a wall, finished in white and built around a single GU10 lamp holder. It takes a PAR16 GU10 bulb up to 10W running on a 220-240V AC mains supply, so output and colour temperature follow whichever lamp you fit rather than being fixed at the fitting. The body measures Ø80mm with a 120mm projection, giving a small, neat profile that sits close against the surface. American buyers will know this format as a mini surface spot or surface-mounted can taking a standard GU10 lamp.

The fitting suits hallways, landings, alcoves and smaller rooms where a single tidy point of light is wanted rather than broad room flood. Because the GU10 lamp can be swapped, you can choose a wider beam for general fill or a tighter one to graze a wall or pick out a feature; brightness scales with the lamp, so the practical coverage depends on the bulb you select. Mounted on a ceiling it works at standard domestic heights, and the same housing turns the fitting into a directional wall light for reading corners or to wash a vertical surface. It is rated IP20, so keep it to dry interior locations and clear of bathrooms and any damp or outdoor spots.

Construction is steel with a white finish, a solid and serviceable choice for a fitting that will be handled when changing lamps. The integral GU10 holder means no separate driver or transformer is required; it wires straight to the mains and accepts any compatible GU10 lamp, with dimming determined by the bulb and switch you pair it with. At 220g it is light enough for straightforward surface fixing to either a ceiling or a wall. The Enali sits within a wider range of GU10 surface fittings, so single and multi-head options can be matched across a room.

What size room does it suit?

The Enali is a single-lamp GU10 fitting, so it gives a focused point of light rather than whole-room illumination. It works best in halls, landings, alcoves and smaller spaces, or grouped in multiples across a larger ceiling. Choose the lamp wattage and beam angle to match the area you want to cover.

Does it take a replaceable bulb?

Yes. It uses a standard GU10 PAR16 lamp rated up to 10W, which you supply and can change at any time. This lets you set the colour temperature and beam spread by your choice of bulb rather than being locked to a fixed source.

Can it be used in a bathroom or outdoors?

No. The Enali is rated IP20, which means dry indoor use only. Keep it clear of bathrooms, shower zones and any damp or outdoor locations.

How should the fitting be cleaned?

Switch off the power and let the lamp cool, then wipe the white steel housing with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents that could mark the finish, and make sure the fitting is fully dry before switching back on.