Enali 470x80 3 x GU10 Triple Spotlight Bar - White

The Enali is a triple-head LED ceiling light built around three GU10 lamp holders, each taking a PAR16 spot of up to 10W and running from a standard 220-240V AC mains supply. The three heads sit along a slim 470mm bar and can be angled independently, so the light is steered where it is wanted rather than washing the whole space evenly. Sold in the United States as a flush mount LED ceiling light or spot bar, it gives directional control from a single fixed point on the ceiling.

Because each head pivots, the Enali suits rooms where light needs to be aimed at particular areas: a kitchen with a hob and worktop to pick out, a hallway run that benefits from staggered pools of light, or a living room where a reading chair and a shelf want separate beams. The slim 470 by 80mm bar keeps the fitting unobtrusive on lower ceilings, and the three adjustable spots together cover a good-sized room when the heads are spread. It is an indoor fitting only, so keep it to dry interior rooms rather than porches, bathrooms or any damp location.

The body is steel finished in white, with three GU10 holders mounted to the 470 by 80 by 135mm bar and a total weight of 590g. It is rated IP20 for dry indoor use, and can be fitted to a ceiling or a wall depending on where the directional heads are needed. The fitting takes replaceable GU10 lamps, so output and colour temperature are set by the bulbs chosen, and dimming depends on those lamps and the circuit. The wider Enali range includes matching multi-head spotlight bars for coordinating fittings across a room.

How big a room does the Enali suit?

With three independently angled heads, it works best where light is aimed at specific zones rather than spread flat across a large floor. In a kitchen, hallway or living room the spread of the three spots covers a typical medium room, and the directional heads let you concentrate light on worktops, seating or a feature wall.

Does it take a replaceable bulb or is the LED integrated?

It takes three replaceable GU10 PAR16 lamps, each rated up to 10W, so it is not an integrated LED fitting. You choose the brightness and colour temperature through the bulbs you fit, and any lamp can be swapped out individually if it fails.

Can it be mounted on a wall as well as a ceiling?

Yes. The fitting is suitable for both ceiling and wall mounting, and the three heads pivot so the beams can be aimed to suit either position. It connects to a standard 220-240V AC supply.

How should the fitting be cleaned?

Turn the power off and let the GU10 lamps cool, then wipe the white steel bar and heads with a soft dry or slightly damp cloth. Avoid solvents or abrasive cleaners on the finish, and do not let moisture reach the lamp holders as this is an indoor IP20 fitting.