ENALI 470x80 3 x GU10 Triple Spotlight Bar - Black

The Enali is a triple-head spotlight bar built around three GU10 lamp holders, each taking a lamp up to 10W, run from a 220-240V AC supply. The PAR16 format gives three directional heads that can be angled independently along the 470mm bar, so the light can be aimed where it is wanted rather than spread evenly. American buyers will recognise this layout as a three-light track-style fixed spot bar, with the GU10 being the standard mains-voltage twist-lock lamp. With the lamps left to the installer, the colour temperature and beam can be set to suit the room.

Three adjustable heads make the Enali a practical choice for kitchens, hallways and living rooms where pools of light over a worktop, a run of cabinets or a seating area matter more than flat overall brightness. Aim each head at a different target to cover a longer space from a single fixing point, or cluster the beams to brighten one zone. As an indoor fitting it suits standard domestic ceiling heights and is well suited to rooms where the lighting needs to be steered onto specific features or surfaces after fitting. It works equally on a wall or a ceiling, which helps in awkward layouts and sloped or low ceilings.

Construction is steel finished in black, with the three GU10 heads mounted on a single backplate for either ceiling or wall fixing. The fitting is rated IP20, so it is for dry indoor rooms only and should be kept clear of bathrooms, porches and any exposed or damp location. The GU10 lamps are user-replaceable, and dimming depends on the lamps chosen since the fitting itself does not include a driver. The Enali range covers further configurations in the same black finish for matching a room across several fittings.

How many lumens does it give and what size room does it suit?

Output depends on the three GU10 lamps you fit, each up to 10W, so brightness is set by your lamp choice rather than the fitting. The three adjustable heads make it best for directing light onto a worktop, cabinets or a seating area rather than lighting a whole room evenly. For general room lighting in larger spaces you may want a second fitting or higher-output lamps.

Can the Enali be dimmed?

Dimming depends entirely on the GU10 lamps you choose, as the fitting does not include a driver of its own. Fit dimmable GU10 lamps and pair them with a compatible trailing-edge dimmer for smooth control. Non-dimmable lamps will not respond to a dimmer.

Can it be mounted on a wall as well as a ceiling?

Yes. The Enali fixes to either a ceiling or a wall from its single steel backplate, which helps with low or sloped ceilings and tighter layouts. The three heads can then be angled to aim the light wherever it is needed.

How do I clean the fitting?

Switch off the power and let the lamps cool before cleaning. Wipe the black steel bar and the heads with a soft, dry or slightly damp cloth, avoiding solvents and abrasive cleaners that could mark the finish. As an IP20 fitting it must be kept dry, so never use a wet cloth or spray cleaner directly on it.