Enali Ø200 3x10W GU10 Triple Spot Ceiling Light - White

The Enali is a round ceiling light carrying three GU10 spots on a single Ø200 mm base, each lamp taking up to 10W from a 220-240V AC supply. The PAR16 source format keeps each head compact and directional, so the fitting reads as a flush mount LED ceiling light to UK buyers while serving the same purpose American shoppers expect from a multi-head ceiling spot. Running at mains voltage, it needs no separate transformer, and the three heads can be angled independently to aim light where it is wanted rather than washing the whole space evenly.

Because the three spots are steerable, the Enali suits rooms where light needs directing at specific points: a kitchen aimed at the worktop and hob, a hallway picking out a console or artwork, or a living room highlighting a reading chair and a shelf. It works best on standard domestic ceiling heights, where the throw from the three angled heads covers a small to mid-sized room comfortably without the spots sitting too far from the surfaces they light. Treat it as accent and task lighting rather than a single broad ambient source; pairing the angled output with a wider fitting gives the most balanced result in a busy room.

The body is steel finished in white, measuring Ø200 × 130 mm and weighing 680 g, with the three GU10 holders set into the round plate. It can be fixed to a ceiling or a wall, so the same fitting works as an overhead spot cluster or a directed wall feature. The IP20 rating means it is for dry indoor rooms only, kept clear of bathrooms, porches and any damp or outdoor location. Lamps are not integrated, so you choose the GU10 wattage, colour temperature and dimmable status to suit the room. Other Enali fittings are available in the range alongside this triple-head version.

How big a room will the Enali light?

With three GU10 heads it suits small to mid-sized rooms such as a kitchen, hallway or compact living area. Because the spots are directional rather than a single broad source, it works best as task or accent lighting, picking out worktops, seating or artwork rather than filling a large open-plan space on its own.

Can the three spots be angled separately?

Yes. Each of the three GU10 heads adjusts independently on the Ø200 mm base, so you can aim them at different points such as a worktop, a sink and a shelf. This makes the fitting useful where you want to direct light to specific areas rather than wash the whole room evenly.

Can the Enali be used outdoors or in a bathroom?

No. The Enali is rated IP20, which means it is for dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or outdoor location, as it offers no protection against moisture or water ingress.

How do I clean the fitting?

Switch off the power and let the lamps cool, then wipe the white steel body with a soft, dry or barely damp cloth. Avoid solvents and abrasive cleaners, which can mark the finish, and do not let moisture reach the GU10 holders.