Description
The Empoli is a pendant light with an open cage shade made from flat steel strips in black, gathered beneath a brushed brass cover that sleeves the lampholder. The strips curve out from the brass top to a rounded shoulder, then taper to a ring at the open base, so the bulb hangs in plain view inside the cage. It is 110cm tall overall and 20cm in diameter, hanging from a round black ceiling canopy on a slim black flex. It takes an E27 bulb of up to 40W, and the bulb is not included, so the choice of bulb is yours. Its IP20 rating settles where it goes: indoors, in a dry room.
Because the shade is open, the bulb becomes part of the look, which is why we suggest a decorative filament bulb for it. At 20cm across, it is a sensible size over a small dining table, a kitchen island or a breakfast bar, where a row of them reads well, and on its own it suits a hallway, a landing or a bedroom. The black and brushed brass pairing sits happily with dark wood, stone grey walls and soft neutrals, and it gives an industrial scheme a warmer edge without looking fussy. You get a pendant that looks finished whether the bulb is lit or not.
The body is steel, finished in black on the cage and the canopy, with brushed brass on the lampholder cover, and the brushed finish shows a soft grain rather than a mirror shine. There is no switch on the light itself, because it is switched at the wall. As a hard-wired mains light, it is installed by a qualified electrician, and the installation instructions come as a download. Packed, it weighs 1.108KG. Dust the strips with a soft dry cloth while the light is off and cool, and keep abrasive cleaners away from the brass.
Specification
| Overall Height |
110cm |
| Diameter |
20cm |
| Body Material |
Steel |
| Body Colour |
Black, brushed brass |
| Light Source |
E27 (bulb not included) |
| Wattage |
Max 40W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
1.108KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Empoli pendant go in a bathroom or outdoors?
No. It is rated IP20, which means indoors in a dry room only, so we suggest a dining area, a kitchen island, a hallway or a bedroom instead.
Does the pendant come with a bulb?
No, the bulb is not included. It takes an E27 bulb up to a maximum of 40W, and a decorative filament bulb looks good through the open cage.
How big is the shade?
The shade is 20cm in diameter and the light is 110cm tall overall, which suits a small dining table, a breakfast bar or a hallway.
What is the pendant's body material?
The body is steel, finished in black on the cage shade and the ceiling canopy, with brushed brass on the cover around the lampholder.
Does the light have its own switch?
No, there is no switch on the pendant itself. It is switched at the wall, so your wall switch controls it.
How should I clean the black and brushed brass finish?
With the light switched off and cool, wipe the steel strips and the brushed brass with a soft dry cloth, and avoid abrasive cleaners on the brass.