Description
The Emberara is an 8-light crystal chandelier built around a 400mm polished chrome canopy, with multiple tiers of faceted crystal rods cascading in a spiral drop. Eight E14 bulbs (sold separately) sit within the upper tier, each surrounded by crystal prisms that refract light through the full length of the drop. The chrome frame provides structural support while the crystal does the visual work, creating prismatic reflections across ceilings and walls when lit.
Designed for medium to large spaces with ceiling heights of 2.6m or above, the Emberara works over dining tables, in double-height entrance halls, and in living rooms where a decorative centrepiece is needed. The spiral arrangement of the crystal tiers gives the chandelier visual depth from multiple viewing angles, so it reads clearly whether viewed from below or from an upper landing. The IP20 rating confines use to dry indoor locations away from bathrooms and outdoor areas.
The crystal rods are cut with multiple facets, so each rod acts as a prism when light passes through it, splitting white light into spectrum colours that shift as you move around the room. The polished chrome finish on the frame reflects ambient light during the day and becomes less visible once the chandelier is lit, allowing the crystal to dominate the visual effect. The fitting is dimmable when paired with compatible E14 dimmable bulbs and a suitable dimmer switch, allowing the light level to be adjusted for different times of day.
Specification
| Diameter (mm) |
400 |
| Dimmable |
Yes |
| Number Of Bulbs |
8 |
| Bulb Type |
E14 |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
What bulbs does the Emberara take?
The chandelier takes eight E14 small Edison screw bulbs, sold separately. For best results use warm-white LED candle bulbs between 3W-5W and 2700K-3000K. Clear or frosted finishes both work, though clear bulbs create more defined prismatic effects through the crystal.
Is it dimmable?
Yes, the Emberara is dimmable when fitted with dimmable E14 bulbs and connected to a compatible LED dimmer switch. Standard rotary dimmers may cause flickering with LED bulbs, so check dimmer compatibility before installation.
What ceiling height is needed?
The chandelier suits ceiling heights of 2.6m or above. The tiered crystal drop extends below the canopy, so adequate clearance is needed to avoid the chandelier sitting too low in the room. For dining table installation, allow 700-850mm clearance between the table surface and the lowest crystal tier.
How is the crystal cleaned?
Switch off at the mains before cleaning. Wipe each crystal rod individually with a dry microfibre cloth to remove dust. For fingerprints or more stubborn marks, use a cloth very lightly dampened with distilled water and dry immediately. Avoid household sprays or polishes, which can leave residue on the crystal facets.