Description
The Eclipseax is an 18cm diameter outdoor LED wall light with three circular diffuser panels recessed into a grey metal disc, each casting a halo of warm 3000K light onto the wall surface. An integrated 9W LED sits behind each circular panel, producing a total output that spreads as indirect wash light rather than forward projection. The IP54 rating protects the internals against dust ingress and water splashes from any direction.
Designed for exterior walls on patios, driveways, front entrances and courtyard boundaries, the Eclipseax works where ambient marker light is needed rather than direct task illumination. The three circular halos create a visual pattern on the wall surface after dark, turning the fitting itself into an architectural detail. At 18cm diameter the light sits comfortably on 20-30cm wide pillars, beside doorways, or in groups of two or three along boundary walls.
The grey metal body is powder-coated for UV and weathering resistance, suited to year-round outdoor exposure in the UK climate. The non-dimmable 9W LED runs at 3000K, giving a warm white tone that sits between golden yellow and neutral white. The combined weight and mounting plate give the fitting stability on masonry, rendered walls and timber cladding when installed with appropriate fixings. Ideal Lux backs the Eclipseax with a 5-year manufacturer warranty.
Specification
| Diameter (mm) |
180 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP54 |
| Warranty |
5 Years |
Frequently Asked
Can this be used in exposed coastal areas?
The IP54 rating protects against dust and water splashes but does not provide full waterproof sealing. For coastal locations with salt spray exposure, consider a wall position under an eave or soffit where the fitting has some overhead protection.
What type of wall is it suitable for?
The Eclipseax mounts to masonry, rendered block, timber cladding and brick using appropriate wall plugs and screws. The mounting plate distributes load across four fixing points. Installation on plasterboard or thin cladding requires additional backing support.
Does it need an electrician to fit?
Yes. Outdoor wall lights in the UK must be installed by a competent person in accordance with BS 7671 wiring regulations. The fitting connects to mains 230V supply and requires a junction box or surface-mounted cable entry depending on the wall construction.
How much light does 9W produce?
A 9W LED at 3000K typically produces 700-900 lumens total output, but the Eclipseax directs this as wash light onto the wall surface rather than forward into the space. This gives ambient marker lighting rather than area illumination, suited to accent and wayfinding rather than security flood lighting.