Eclipsea 6 Light Bar Wall Light - Chrome

The Eclipsea is a 605mm linear wall light with six polished chrome E14 bulb holders arranged in a single horizontal bar. Each bulb sits inside a white frosted glass globe, mounted on a slimline chrome backplate that projects just 40mm from the wall. The six bulbs (sold separately) sit evenly spaced across the length, providing distributed light rather than a single bright point.

Designed for bathroom mirror lighting, vanity areas and hallway accent walls, the Eclipsea fits spaces where horizontal task light is needed across 600-900mm of wall width. In bathrooms, the fitting sits above or to the side of a mirror to reduce shadows on the face during grooming tasks. In hallways, the linear form provides even wash light along feature walls or artwork runs without the visual weight of a larger pendant or downlighter array. The 40mm projection keeps the fitting close to the wall, useful in tight spaces where deeper fittings would interfere with door swings or narrow corridors.

The polished chrome finish reflects ambient daylight in bathrooms and creates a clean metallic accent in contemporary interiors. The IP20 rating means the fitting is suitable for general indoor use but not rated for direct water contact, so it works above bathroom mirrors and sinks but should not be placed in shower enclosures. The E14 small Edison screw bulbs allow flexibility to choose warm white for residential bathrooms or cool white for commercial washrooms, and the fixture is dimmable when paired with appropriate dimmer switches and compatible bulbs.

What bulbs does it take?

The Eclipsea takes six E14 small Edison screw bulbs, sold separately. Most users pair this with 4-6W LED candle bulbs in 2700K-3000K warm white for bathroom mirrors, or 4000K cool white for commercial washrooms.

Can it be used in bathrooms?

Yes, but with limitations. The IP20 rating means it is suitable for general bathroom use above mirrors and sinks, but it is not rated for direct water contact. Do not install this fitting inside shower enclosures or directly above baths where it could be splashed.

Is it dimmable?

Yes. The fitting itself is dimmable, but you will need to use dimmable E14 LED bulbs and pair the circuit with a compatible dimmer switch rated for LED loads. Standard incandescent dimmers may not work reliably with LED bulbs.

How is it mounted?

The chrome backplate fixes to the wall with screws into a suitable masonry or timber surface. The backplate measures 605mm long and 40mm deep, so ensure the wall has fixing points that can support the weight of the fitting and six bulbs.