Description
This is the bare bones of a pendant: a matt white plastic base of 90mm, a length of white flex and a soft silicone cover over the lampholder itself. It takes an E27 lamp, with the drop set anywhere up to 1.5m. LED lamps suit it best, within the 20W ceiling, and it will dim if you pair a dimmable lamp with a compatible dimmer. Nothing about it competes with the lamp you hang in it, which is rather the point.
We sell plenty of these to customers running several in a row over an island or a long table, where matching flexes read together rather than as separate fittings. On its own it works in a small hallway, a utility room, a pantry or a child's room, and it is a sensible answer in a rented flat where you want light without ceremony. It suits a filament-style lamp or an opal globe, and will take a lightweight shade if you would rather soften the light. Keep it to dry rooms, away from splashes.
The base and holder are moulded plastic in a matt white that sits quietly against a pale ceiling, and the silicone sleeve softens the line of the holder. It is double insulated. For cleaning, switch off at the wall, let the lamp go cold, then wipe the base and draw a cloth down the flex; a barely damp cloth is plenty, and no solvents. It carries a two year warranty. We stock the wider Dreifa range alongside it, including ceiling lights in matt black, antique brass, polished chrome and pewter, plus frame-only curved pendants in linear and round shapes. Lamps are not included.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Weight |
0.18KG |
| Diameter |
90mm |
| Minimum Drop |
180mm |
| Maximum Drop |
1500mm |
| Materials Used |
Plastic Base, Silicone Lampholder |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (ALL) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamp should I use with it?
It takes an E27 lamp of up to 20W, and any LED type is a good match. No lamp comes with it, so choose the shape and colour temperature you like the look of.
How far down does it hang?
The drop runs from 180mm at its shortest to 1500mm fully extended, so it can sit close under a low ceiling or hang well down over a table.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and use a dimmer switch that is compatible with it. A non-dimmable LED will flicker or refuse to dim, whatever the switch.
What is it made of, and how heavy is it?
The 90mm base and the holder body are moulded plastic, with a silicone cover over the lampholder. The whole thing weighs about 0.18kg, so it is very light for its size.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry indoor rooms only, so bathrooms, shower rooms and covered outdoor areas are out.
How should I clean it?
Switch off and let the lamp cool, then wipe the white base with a barely damp cloth and run the cloth along the flex to lift dust. Avoid solvents and abrasive creams, which will dull the matt finish.