Description
Stripped back to the essentials: a single E27 holder on black flex, finished with a slim plastic base and a soft silicone collar wrapped around the holder itself. Everything is matt black, top to bottom, so the fitting reads as a quiet vertical line rather than a piece of hardware competing with the bulb. The flex runs to 1.5m and the base measures 90mm across, discreet enough to go almost unnoticed above whatever shade, cage or bare decorative lamp you choose to hang beneath it.
It holds one E27 lamp of up to 20W, and an LED is the sensible choice here. Paired with a dimmable lamp and a compatible dimmer, the light will dim. We reach for holders like this when a filament style bulb is the whole point, hung bare above a dining table, dropped in a loose row along a kitchen counter, or used beside a bed where a table lamp would only eat into the surface. It suits a hallway, a landing or a rented flat just as well, where something plain and easy to swap beats a fussy fitting.
The base and holder are moulded plastic and double insulated, and the fitting is meant for dry rooms indoors rather than porches, bathrooms or anywhere steam and splashes gather. Cleaning takes moments: turn the power off at the switch, let the bulb go cold, then run a dry cloth over the base and the silicone collar, keeping damp cloths and sprays well away from it. It carries a two year warranty. The same range gives you matching ceiling lights in matt black, matt white, antique brass, antique copper, polished chrome, black chrome, satin nickel, gilt bronze and pewter, plus curved pendant frames if you want a longer run in one piece. Lamps are not included.
Specification
| Colour |
Matt Black |
| Ceiling Mountable |
Yes |
| Weight |
0.18KG |
| Diameter |
90mm |
| Minimum Drop |
180mm |
| Maximum Drop |
1500mm |
| Materials Used |
Plastic Base, Silicone Lampholder |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (ALL) |
| Light Distribution |
Ambient |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take?
One E27 screw lamp, up to 20W. We would choose an LED, and a decorative filament LED looks right in a holder left bare like this one.
How long is the drop?
It can hang anywhere between 180mm and 1500mm, so it will sit tight under the ceiling or fall low over a table.
Can the light be dimmed?
Yes, provided you use a dimmable lamp together with a dimmer compatible with it.
Is a shade included?
No, this is the holder and flex only, ready for a shade of your choosing or a bare bulb. The base is 90mm in diameter.
Will it cope with a bathroom or a covered porch?
No. Keep it to dry indoor rooms, away from steam, damp and splashing water.
How should I clean the silicone collar?
Switch off, let the lamp cool completely, then wipe it with a dry cloth. Avoid solvents and polish, which can mark the matt black finish.