Description
This is the deeper of the two lampholder rings we keep in the Dreifa range, a small threaded collar of 50mm across that sits at the lampholder and holds a shade in place. The antique brass has the softened, faintly darkened tone of older metalwork rather than a bright polish, so it reads as part of the fitting instead of a shiny afterthought. Being a plain mechanical part, there is no wiring and no lamp involved in the ring itself.
It is the sort of small piece that finishes a job properly. If you are hanging a new shade on a pendant, or replacing a ring that has gone dull or lost its thread, this is what closes the gap between shade and holder. We reach for the deeper version where a shade collar needs a little more purchase than a shallow ring gives. Rings are matched to particular lampholders, so do ask us if you are not sure which one your fitting was built around, and we will check it against the holder before you order.
The ring is turned metal, light in the hand, with the antique brass finish carried across the visible face and the outer edge. Keep it clean with an occasional dry wipe and leave metal polishes and creams well alone, as they will strip the aged tone and leave a patchy brightness behind. It carries a one year warranty. We also stock this ring in gun metal for darker fittings, and if you are building up a full pendant from parts, the range includes matching Dreifa ceiling boxes in antique brass along with a dozen other finishes, from matt black and polished chrome through to aged pewter and copper. The shade and lampholder are bought separately.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
0.01KG |
| Diameter |
50mm |
| Height |
15mm |
| Materials Used |
Die-cast Aluminium |
| Lamp Cap |
Non-Electric |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size is this lampholder ring?
It measures 50mm in diameter and stands 15mm tall, which is the deeper of the two Dreifa ring depths.
Is there any wiring or electrical part to it?
No. It is a purely mechanical, non-electrical component that grips the shade at the lampholder.
Will it fit any lampholder?
Rings are matched to a specific lampholder, so tell us which holder you have and we will confirm the ring suits it.
How should I look after the antique brass?
A dry cloth is all it needs. Avoid polishes, creams and abrasive pads, since they lift the antiqued surface and cannot be restored.
Is it offered in other finishes?
We stock the deeper ring in antique brass and in gun metal.
Is there a warranty?
It carries a one year warranty.