Description
Metal, formed into a shallow curved cone and finished in pewter, a soft grey that reads warmer than chrome and quieter than steel. At 30cm across it is the larger of the sizes we stock in this shape, and its low profile means it sits close over the lamp rather than dropping a deep drum around it. The curve is gentle, nearer a saucer than a funnel, and the finish has a slight depth that catches along the rim.
There is no wiring of its own, so this is a shade for a fitting you already own or are building up piece by piece. The curved over arm floor lamps in this range are the obvious partner, and it works just as well on a table lamp base of similar scale. We would put an LED GLS lamp in the host fitting, or a slim tubular lamp if you would rather the shape stayed tucked away. Over a reading chair, at the end of a sofa or beside a bed, the shallow cone keeps light pooled where you want it rather than spreading it thinly across the room.
It is metal throughout, light in the hand, and the pewter tone hides fingermarks better than a bright polish does. Dust it with a dry microfibre cloth; if marks show on the outside, use a barely damp cloth and dry it straight after, and keep solvents, cream cleaners and anything gritty away, as they will dull the surface. Somewhere dry indoors is right for it, so living rooms, bedrooms and studies rather than a bathroom or a porch. It carries a one year warranty. The same 30cm cone is also offered in painted antique brass, painted antique copper, beige stone and satin black, and the shape comes in a smaller size in pewter as well, so a pair of lamps can match or deliberately differ. The lamp itself belongs to the host fitting.
Specification
| Colour |
Pewter |
| Weight |
0.39KG |
| Diameter |
300mm |
| Height |
115mm |
| Materials Used |
Iron |
| Lamp Cap |
Non-Electric |
| Recommended Lamp |
LED (GLS A60, Tubular T45) |
| IP Rating |
IP20 |
| Shade Socket |
E27 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Pewter |
| Shade Hole Diameter |
42mm |
| Pieces Included |
1 |
| Installation |
Requires attaching to a relevant light source |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size is this shade?
It measures 300mm in diameter and 115mm in height, so it is wide but shallow, sitting low over the lamp rather than enclosing it.
Does it come with a lamp or any wiring?
No. It is a non-electric shade, so the lampholder, flex and lamp all come from the fitting it goes on.
Which lamps suit it best?
An LED GLS A60 is our usual choice, and a tubular T45 works well if you prefer a narrower shape within the cone.
What is the shade hole size?
The hole measures 42mm across, which is the size used by the curved over arm floor lamps in this range.
What is it made from?
Metal, in a pewter finish. It weighs 0.39kg, so it is easy to lift and reposition on a floor lamp arm.
Is there a smaller version?
Yes, the same curved shallow cone is made at 210mm as well, including in pewter.