Description
A shallow curved cone in metal, finished in painted antique copper so the colour reads warm and a little aged rather than bright and new. The profile is wide and low, curving gently out to the rim, which spreads light downwards and keeps the shape sitting close to whatever holds it. At 30cm across it is the larger of the two we hold in this shape. There is no trim and no pattern; the copper tone does all the work, and it reads friendlier than chrome in a room with wood and warm textiles.
This is a non-electric shade, so it goes onto a fitting you already own or one bought alongside it. We stock the Dreifa curved over arm floor lamps without shades for exactly that reason, and the cone sits neatly at the end of the arm, dropping light onto a chair or a book. It works just as well on a standard lamp in a sitting room corner, or above a small table where you want a broad pool of light on the surface. Lamp choice belongs to the host fitting, and an LED GLS or tubular lamp is what we would put in.
Construction is metal, painted rather than plated, and the shallow curve holds its shape well. Dust it with a dry cloth and lift any marks with one wrung out barely damp; painted surfaces dislike abrasive creams and solvents, so keep those away from it. It carries a one year warranty. The same shallow cone runs through the range in painted antique brass, painted bronze, beige stone and satin black, and a smaller diameter is offered in those finishes plus pewter and satin nickel. Supplied as the shade alone.
Specification
| Colour |
Painted Antique Copper |
| Weight |
0.39KG |
| Diameter |
300mm |
| Height |
115mm |
| Materials Used |
Iron |
| Lamp Cap |
Non-Electric |
| Recommended Lamp |
LED (GLS A60, Tubular T45) |
| IP Rating |
IP20 |
| Shade Socket |
E27 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Painted Antique Copper |
| Shade Hole Diameter |
42mm |
| Pieces Included |
1 |
| Installation |
Requires attaching to a relevant light source |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size is the shade hole?
The hole measures 42mm in diameter, so the shade needs a host fitting or lampholder ring sized to suit.
What are the overall dimensions?
It is 300mm across the rim and 115mm high, giving a wide, shallow cone shape.
Is the shade wired or electrical?
No, it is non-electric. It is a shade only, with no lampholder, flex or switch, and it takes its lamp from the fitting it goes onto.
Which lamp works best beneath it?
An LED GLS A60 or a tubular T45 suits the shallow shape well, fitted in the host lamp or pendant.
How should the painted finish be cleaned?
Dust with a dry cloth and use a barely damp cloth for marks. Avoid abrasive cream cleaners, scouring pads and solvents, which will dull or lift the paint.
Is the same shade available in other finishes?
Yes. This cone comes in painted antique brass, painted bronze, beige stone and satin black, and the smaller size also comes in pewter and satin nickel.