Description
A shallow cone with a gently curved profile, pressed in metal and finished in beige stone, a warm neutral that sits somewhere between putty and sand. At 30cm across the mouth it reads broad and low rather than deep, so light falls in a wide pool instead of a narrow column. The central aperture matches the curved over arm floor lamps in the same range, which is what the shape was drawn for.
It suits a reading corner: an over arm lamp leaning across an armchair, a sofa end or the corner of a study desk, low enough to keep the glow on the page rather than the ceiling. Beige stone is the quietest finish we hold in this shape, so it works where brass or black would draw too much attention, and it sits happily with pale plaster colours, oak and linen. Being non-electric, it has no wiring of its own; we would put an LED GLS or slim tubular lamp in the host fitting it sits on.
The body is metal throughout, painted in an even coat inside and out, and light enough in the hand to lift on and off without fuss. Keep it clean with a dry cloth, and use a soft brush to reach dust caught in the inner curve; solvents and cream cleaners will dull the paint, so leave those under the sink. We stock the same curved cone in a smaller size and, at this size, in painted antique brass, antique copper, bronze and satin black, so two lamps in one room can match or deliberately differ. It is one we reach for when a fabric drum would look too soft against a metal frame. It carries a one year warranty.
Specification
| Colour |
Beige Stone |
| Weight |
0.39KG |
| Diameter |
300mm |
| Height |
115mm |
| Materials Used |
Iron |
| Lamp Cap |
Non-Electric |
| Recommended Lamp |
LED (GLS A60, Tubular T45) |
| IP Rating |
IP20 |
| Shade Socket |
E27 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Beige Stone |
| Shade Hole Diameter |
42mm |
| Pieces Included |
1 |
| Installation |
Requires attaching to a relevant light source |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size is this shade?
It measures 300mm in diameter with a height of 115mm, giving a broad, shallow spread of light rather than a deep cone.
Which lamp should I use with it?
The shade itself is non-electric, so the lamp belongs to the fitting it sits on. An LED GLS A60 or a tubular T45 works well.
What is the shade aperture?
The hole at the centre is 42mm, sized to suit the Dreifa curved over arm floor lamps.
What is it made from?
Metal, painted in a beige stone finish inside and out.
How should I clean it?
Dust it with a dry cloth and lift trapped dust from the inside curve with a soft brush. Avoid solvents, cream cleaners and abrasive pads, which will mark the paint.
Is this shade suitable for a bathroom?
No. It is rated for ordinary dry rooms and should be kept away from steam and splashing.