Description
The Diamante II is a 515mm flush ceiling light with a faceted white frame and an integrated 54W LED delivering 3900lm at 3000K warm white. The multi-faceted surface is moulded into the frame itself, creating geometric angles that catch and reflect light across the ceiling plane without adding projection depth. An opal diffuser sits beneath the frame, softening the LED output into even, shadow-free illumination across the room.
Designed for living rooms, bedrooms and hallways with ceiling heights of 2.3-2.6m, the Diamante II provides general ambient lighting in spaces where a pendant would hang too low or where a traditional flush fitting looks too flat. The 110mm overall height includes the canopy and diffuser, sitting close to the ceiling while the faceted frame gives enough visual interest to avoid the featureless disc appearance of basic flush fittings. The 120° beam angle spreads light across a typical 4m x 4m room without hot spots or dark corners.
The white frame is made from moulded plastic with a satin finish that diffuses reflections and pairs cleanly with white or near-white ceilings. The faceted geometry mimics the cut planes of a gemstone, with each angled surface catching different tones of the warm LED light depending on viewing angle. At 1.17kg the fitting is light enough to mount directly onto a standard ceiling rose without additional support, and the non-dimmable LED driver is integrated into the canopy, so no separate control gear is needed.
The Diamante II is made in Spain. The 3-year warranty covers the integrated LED and driver, and the fitting is rated for indoor use only with no IP protection. The LED is non-replaceable, so the 54W rating and 3000K colour temperature are fixed for the lifetime of the fitting.
Specification
| Colour Finish 1 |
White |
| Shade Colour |
Opal White |
| Diameter |
515mm |
| Height |
110mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
120° |
| Lumen |
3900lm |
| Power Consumption |
54W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
1.17KG |
| Warranty |
3 Year |
Frequently Asked
Is the Diamante II suitable for low ceilings?
Yes. At 110mm total height the fitting sits close to the ceiling without hanging down into the room, making it suitable for ceiling heights of 2.3m and above. The 515mm diameter suits rooms between 3.5m x 3.5m and 5m x 5m.
Is it dimmable?
No. The integrated LED driver does not support dimming. The output is fixed at 3900lm and cannot be reduced.
Can the LED be replaced?
No. The LED is integrated into the fitting and non-replaceable. The 54W LED is covered by a 3-year warranty and is rated for approximately 25,000 hours of use.
What colour temperature is 3000K?
3000K is warm white, similar in tone to a traditional halogen bulb. It produces a warmer, more yellow-toned light than daylight or cool white LEDs (4000K-6500K), making it suited to living rooms and bedrooms where a relaxed atmosphere is preferred.