Description
Wide, shallow and bright, this fitting sits close to the ceiling and spreads its light across a room rather than dropping it in a pool. The metalwork is polished chrome, so it picks up daylight and lamplight alike, and the acrylic shading combines red with opal white to diffuse the four E27 lamps held behind it. At 67cm across it is one of the larger flush fittings we stock, and it reads as a single clean disc when seen from below.
We reach for this where ceiling height is tight and a pendant would hang into head space: a kitchen-diner, a broad landing, a hallway that needs lighting end to end. The spread is ambient rather than directional, so it works well as the main light in a family room with table lamps for reading alongside. With suitable lamps and a compatible dimmer fitted, the output can be taken down for the evening. Keep it to dry interior rooms; a bathroom or a covered porch asks for something sealed.
Acrylic keeps the weight and the cost sensible for a fitting of this width, and the opal sections carry colour without going murky once lit. The chrome is polished rather than brushed, so it stays crisp against a white ceiling. Dust it with a dry microfibre cloth; for fingerprints, a cloth just damp with warm water is enough, as solvents and cream cleaners will haze acrylic permanently. It carries a one year warranty. Lamp choice is yours, and we would fit LED GLS globes here. Within the range, the same size comes with black and white acrylic in place of the red, and there are smaller versions as well as hanging versions.
Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Second Colour |
Red |
| Third Colour |
White |
| Weight |
7.50KG |
| Diameter |
670mm |
| Minimum Drop (mm) |
175mm |
| Maximum Drop (mm) |
1650mm |
| Materials Used |
Acrylic, Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Wire |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
4 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Red/Opal White |
| Shade Material |
Acrylic |
| Shade Shape |
Cylinder |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamps does it take?
Four E27 lamps, each up to 20W. We suggest LED GLS A60 globes, which suit the shape of the shading and keep running costs down.
How wide is it?
The diameter is 670mm, so allow a clear circle of ceiling a little larger than that when planning the position.
Can it be dimmed?
Yes, provided you use dimmable lamps and a dimmer switch rated for them. No dimmer is supplied with the fitting.
What colours are in the shading?
Red and opal white acrylic, set against polished chrome metalwork.
How should the acrylic be cleaned?
Switch the light off and let it cool, then dust with a dry soft cloth. If marks remain, use a cloth lightly dampened with warm water only, never a solvent or an abrasive cream.
Is it suitable for a bathroom?
No. It is rated for ordinary dry rooms, so choose a sealed fitting for bathrooms and other damp spaces.