Description
The Daber is a round LED ceiling light with a built-in PIR motion sensor, drawing 12 or 20W to deliver up to 2630 lumens across a wide 105 degree spread. It runs on 220 to 240V AC and switches between 3000K, 3500K and 4000K, moving from a warm glow through to a brighter neutral white depending on the setting chosen. American buyers searching for a flush mount LED ceiling light will recognise the format: a compact 301mm disc that sits close to the surface rather than hanging below it, with the sensor triggering the light only when movement is detected.
The Daber suits covered outdoor and damp areas where hands-free lighting is useful, such as porches, carports, sheltered entrances, stairwells, utility rooms and garages. At its full output it covers around 8 to 9 m² at general lighting levels, which makes it a practical fit for a small landing, a porch or a compact storage space where you want the light to come on automatically as you approach. Because it mounts tight to the surface, it works on the lower ceilings often found in these spaces, and the PIR removes the need to fumble for a switch with full hands.
Built from polycarbonate with a white finish, the Daber carries an IP66 rating for full weatherproofing in exposed and wet locations, alongside an IK10 impact rating for knock resistance in busy utility settings. It mounts to either a wall or a ceiling and runs direct from mains voltage, with a rated lifespan of 50,000 hours. The light is not dimmable, and colour temperature is selected at installation rather than from a remote. This fitting joins the wider Daber range of weatherproof sensor luminaires held in stock at Niori.
Specification
| Power |
12 / 20W |
| Voltage |
220-240 AC |
| Luminous flux |
max 2500 / 2530 / 2630 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
105° |
| IP rating |
IP66 |
| IK rating |
IK10 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø301 × 60 mm |
| Weight |
1.10 kg |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
How large an area does it light?
At its top output of around 2630 lumens, the Daber covers roughly 8 to 9 m² at general lighting levels. That makes it well suited to a porch, a small landing or a compact garage or utility space. The wide 105 degree beam spreads the light evenly across the surface below.
Can it be used outdoors?
Yes. The Daber is rated IP66, so it is fully weatherproof and suitable for exposed outdoor and wet locations such as open porches, carports and external walls. The IK10 rating also gives it strong resistance to knocks and impacts in exposed positions.
Does it have a replaceable bulb?
No, the LED is integrated into the fitting and is not designed to be swapped out. It is rated for 50,000 hours of use, so the whole unit is built to last for many years before replacement is needed. There are no separate bulbs to buy or fit.
How do I clean it?
Wipe the polycarbonate diffuser with a soft, damp cloth and a mild detergent, then dry it gently. Avoid abrasive pads or harsh solvents, which can dull the surface. Always switch the light off and let it cool before cleaning.