Description
The Daber is a round LED ceiling light in a 301mm black polycarbonate body, set up to run at either 12W or 20W so the output can be matched to the space. At the higher setting it gives up to 2560 lm, with a wide 105 degree spread that washes a room or sheltered area evenly rather than spotting a single point. Colour temperature is selectable across 3000K, 3500K and 4000K, moving from a warm domestic tone through to a crisper neutral white. Buyers in North America will recognise the format as a round flush mount LED ceiling light, fixed close to the surface with no hanging element.
Because it carries an IP66 rating it suits far more than dry indoor rooms. It works on porches, in covered entrances, on soffits and in carports, as well as utility spaces, garages and bathrooms where moisture is a factor. At the 20W setting and around 2560 lm it covers roughly 8 to 9 m² at general lighting levels, which makes it a practical single fitting for a small to medium room, a landing or a shed. On standard ceiling heights the 105 degree beam keeps the light open and avoids the tight pooling you get from a narrow downlight, so two fittings will comfortably handle a larger hallway or outbuilding run.
Construction is moulded polycarbonate throughout, which keeps weight down to 1.06 kg and gives the IK10 impact rating alongside the IP66 weatherproofing, a useful pairing for exposed or knock-prone locations. It mounts directly to a wall or ceiling and runs on 220 to 240V AC, so no separate transformer is required. The fitting is not dimmable and the LED is integrated rather than lamp-based, with a rated life of 50,000 hours. The finish is black throughout the housing. The Daber range includes further sizes and tones for matching across a project.
Specification
| Power |
12 / 20W |
| Voltage |
220-240 AC |
| Luminous flux |
max 2450 / 2480 / 2560 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
105° |
| IP rating |
IP66 |
| IK rating |
IK10 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø301 × 60 mm |
| Weight |
1.06 kg |
| Material |
Polycarbonate |
| Finish |
Black |
Downloads
Frequently Asked
Can the Daber be used outdoors?
Yes. With an IP66 rating it is fully weatherproof and suitable for exposed outdoor and wet locations, including porches, soffits, carports and covered entrances. The IK10 rating also means it resists impact, which helps in knock-prone spots.
How big a room will it light?
At the 20W setting it delivers up to 2560 lm, covering around 8 to 9 m² at general lighting levels. That makes it a sensible single fitting for a small to medium room, landing or outbuilding, with the 105 degree beam keeping the spread even.
Is the Daber dimmable?
No, this fitting is not dimmable. The output is instead set by choosing the 12W or 20W power option and the colour temperature by selecting 3000K, 3500K or 4000K, so you can tune brightness and tone at install.
How do I clean it?
Wipe the polycarbonate housing with a soft, damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents that could dull the surface. Make sure the power is off and the fitting is cool before cleaning.