Description
The Daber is a round LED ceiling light built for exposed and wet locations, with a switchable output of 8W or 13W drawing up to 1490 lumens from a 220-240V AC supply. Colour temperature is selectable across 3000K, 3500K and 4000K, so the same fitting can read as a warm domestic white or a cleaner neutral tone depending on the setting. The wide 105 degree beam spreads light evenly rather than throwing a tight pool, which suits it to general area lighting. North American buyers will know this round, ceiling-hugging form as a flush mount LED ceiling light.
Measuring Ø251 by 59 mm, the Daber sits close to the surface and works well on porches, covered entrances, soffits, sheltered walkways and outbuildings, and indoors in bathrooms, utility rooms and hallways. At its 1490 lumen maximum it covers around 5 m² at general lighting levels, so for larger spaces plan on two or more fittings spaced for even spread. The IP66 rating means it can be fitted in fully exposed positions and stand up to direct rain and wash-down, while the wide beam keeps shadows soft across the ceiling.
The body is moulded polycarbonate in a black finish, rated IP66 for weatherproofing and IK10 for strong impact resistance, making it robust enough for areas where knocks are likely. It mounts directly to a wall or ceiling and runs on mains voltage with no separate transformer to specify. The LED is integrated, with a rated life of 50,000 hours, a colour rendering of Ra 80, and the colour temperature set at install; the fitting is not dimmable. The Daber range includes further outdoor and utility fittings in matching black.
Specification
| Power |
8 / 13W |
| Voltage |
220-240 AC |
| Luminous flux |
max 1420 / 1430 / 1490 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
105° |
| IP rating |
IP66 |
| IK rating |
IK10 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø251 × 59 mm |
| Weight |
800 g |
| Material |
Polycarbonate |
| Finish |
Black |
Downloads
Frequently Asked
Can the Daber be used outdoors and in wet areas?
Yes. It carries an IP66 rating, which makes it suitable for fully exposed outdoor positions as well as bathrooms and wash-down areas. It withstands direct rain and water jets, so it can be mounted on open porches, soffits and external walls without a sheltered overhang.
How many lumens does it give and what room size does it suit?
Output is selectable, with a maximum of 1490 lumens at the 13W setting. That covers around 5 m² at general lighting levels, so it suits a small bathroom, porch, hallway or utility space. For larger areas, fit two or more units spaced for even coverage.
Does it use a replaceable bulb?
No. The Daber has an integrated LED rated for 50,000 hours, so there is no separate bulb to change. When the fitting reaches the end of its service life the whole unit is replaced rather than relamped.
How do I clean the fitting?
Switch off the supply and let it cool, then wipe the polycarbonate body and diffuser with a soft, damp cloth. Avoid abrasive pads and solvents, which can dull the surface. The IP66 sealing means an outdoor unit can be carefully wiped down to clear dust and grime.