Description
The Daber is a round LED ceiling light with a built-in PIR motion sensor, switching between 8W and 13W to deliver up to 1510 lumens. Its 105 degree beam spreads light evenly across the space below, and the colour temperature is selectable across 3000K, 3500K and 4000K so the tone can be set warmer for relaxed areas or cooler for working zones. American buyers will recognise this format as a flush mount LED ceiling light, sitting tight to the surface rather than hanging from it. The integrated LED runs straight from a 220-240V AC mains supply, with no separate bulb to fit or replace.
Because the sensor triggers the light automatically, the Daber suits porches, entrances, hallways, stairwells, garages and utility areas where hands-free switching is useful. At its 13W output it covers around 5 m² at general lighting levels, which makes it well matched to a single doorway, a small landing or a compact storeroom. Mounting works on either a wall or a ceiling, and the wide 105 degree spread means it performs well on lower ceilings without leaving dark edges. The IP66 weatherproof rating allows it to be used outdoors in fully exposed and wet locations, not just under cover.
The body is moulded polycarbonate in a white finish, rated IP66 against dust and powerful water jets and IK10 for strong impact resistance, so it stands up to knocks and the weather alike. The integrated LED is rated for 50,000 hours, and the fitting is not dimmable, running at its set wattage. It measures Ø251 by 59 mm and weighs 844 g, mounting flush via its base. The Daber is part of Niori's wider Kanlux range of sensor and weatherproof fittings.
Specification
| Power |
8 / 13W |
| Voltage |
220-240 AC |
| Luminous flux |
max 1450 / 1460 / 1510 lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
105° |
| IP rating |
IP66 |
| IK rating |
IK10 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø251 × 59 mm |
| Weight |
844 g |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
Is this ceiling light suitable for outdoor use?
Yes. The Daber carries an IP66 rating, which makes it weatherproof against dust and powerful water jets, so it is suitable for fully exposed outdoor and wet locations as well as covered areas. It is equally at home on a porch, an external wall or an unheated garage.
How does the built-in PIR sensor work?
The integrated PIR detects movement within range and switches the light on automatically, then off again after the area is clear. This makes it useful for entrances, stairwells and utility spaces where hands-free operation is helpful. There is no separate switch action needed once it is wired in.
What size room does it light, and is it bright enough?
At its 13W setting the Daber gives up to 1510 lumens, covering around 5 m² at general lighting levels. That suits a doorway, a small landing or a compact storeroom, and the 105 degree beam spreads the light evenly across the floor below.
How do I clean the fitting?
Wipe the polycarbonate body with a soft, damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents, which can dull the white finish. For outdoor units, an occasional clean keeps the sensor lens clear so detection stays reliable.